Supermicro MBD-X10DRL-i

Supermicro MBD-X10DRL-I-O

Processor/Cache :

CPU :
Intel Xeon processor E5-2600 v4/ v3 family (up to 145W TDP**)
Dual Socket R3 (LGA 2011)
Cores / Cache : Up to 22 Cores / Up to 55MB Cache
System Bus : QPI up to 9.6 GT/s
Note : BIOS version 2.0 or above is required

System Memory :

Memory Capacity :
8x 288-pin DDR4 DIMM slots
Up to 1TB ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type : 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizez :
RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage : 1.2 V
Error Detection : Corrects single-bit errors

On-Board Devices :
Chipset : Intel C612 chipset
AHCI SATA : SATA3 (6Gbps); RAID 0, 1, 5, 10
SCU SATA : SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI :
Support for Intelligent Platform Management Interface v. 2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers :
Intel i210 Gigabit Ethernet controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8211E PHY (dedicated IPMI)
Video : ASPEED AST2400 BMC

Input / Output :
SATA : 10x SATA3 (6Gbps) ports
LAN :
2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB :
4x USB 3.0 ports (2 rear + 2 via header)
5x USB 2.0 ports (2 rear + 2 via header + 1 Type A)
Video : 1x VGA port
Serial Port / Header : 2x Fast UART 16550 port / 1 Header
DOM : DOM (Disk on Module) power connector
TPM : 1x TPM Header

Expansion Slots :
PCI-Express :
3 PCI-E 3.0 x8
1 PCI-E 3.0 x16
1 PCI-E 3.0 x4 (in x8)
1 PCI-E 2.0 x4 (in x8)

BIOS Type : 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features :
Plug and Play (PnP)
PCI 2.3
ACPI 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7. 1
UEFI 2.3. 1

Management :
Software :
SuperDoctor 5
Intel Node Manager 3.0
Watch Dog
IPMI 2.0

Power Configurations :
ACPI Power Management
Power-on mode for AC power recover

PC Health Monitoring :
Voltage :
Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, Memory Voltages.
5 Phase-switching voltage regulator
FAN :
8x 4-pin fan headers (up to 8 fans)
8x fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature :
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
LED :
CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID
Other Features :
Chassis intrusion detection
Chassis intrusion header
RoHS
Dual Cooling Zones

Operating Environment :
Operating Temperature Range : 10C - 35C (50F - 95F)
Non-Operating Temperature Range : -40C - 70C (-40F - 158F)
Operating Relative Humidity Range : 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range : 5% - 95% (non-condensing)

Form Factor : ATX
Dimensions : 12" x 10" (30.48cm x 25.4cm)