Atrust ATRUST-T180W

Atrust t180W is a WE8S (Windows Embedded 8 Standard) based thin client computer. Developed by Atrust, the ACS (Atrust Client Setup) software is also built in to help effective management of t180W. With the support of Citrix® ICA/HDX, Microsoft® RDP with RemoteFX and VMware® Horizon View, t180W can be used to create virtual and session-based desktop experiences from many remote desktop capable operating systems. t180W offers a rich computing experience where applications look, feel, and behave as local devices, including high-definition multimedia content.

Dual display support
t180W is featuring DVI-I and DVI-D for dual display, up to 1920 x 1200 resolution.

Durable and quiet design
t180W’s efficiently thermal design not only eliminates the need for traditional fans, but also increases system stability and extends product lifetime. The t180W also improves workplace quality because of its noiseless design.

Simplified management
ADM provides a centralized management tool to replace traditional method of configuring each PC. ADM allows MIS staff to set different privilege levels for individual t180W clients. MIS staff can also install/remove applications in/from t180W from a remote site via internet. Devices such as USB ports in t180W can be enable/disable by MIS staff through the same way.

Compact and robust design
t180W weighs 446g (approximate) in a compact enclosure keeping desk space usage to a minimum. Flexible mounting option can let you position it behind a monitor.

Low power consumption
t180W consumes minimal power in its idle state. Compared to normal desktop computers, it saves a considerable amount of an enterprises' energy bill.

Lower total cost of ownership
t180W requires little cost of acquisition. Furthermore, the server-based computing also significantly reduces the IT manpower need for management and maintenance.

Processor
Intel® Bay Trail Quad Core 1.83GHz

System memory
2GB (Manufacturing option : 4GB)

Flash memory
8GB (Manufacturing option : 16GB, 32GB)

Maximum resolutions
Up to 1920 x 1200

I/O ports
Front: 2 x USB 2.0, 1 x Microphone port, 1 x Headphone port,
Rear: 1 x DVI-I, 1 x DVI-D, 1 x USB 3.0*, 1 x USB 2.0, 1 x RJ45, 1 x DC IN, 1 x Kensington lock slot

* By default, your USB configuration is set to use USB 2.0 Host Controller specification (for all USB ports, including the USB 3.0 port) to get full support in all virtualization environments. Otherwise, all or part of your USB-based devices will not be accessible in Citrix or VMware virtual desktops.

To use USB 3.0 Host Controller specification, please switch your USB mode from EHCI to XHCI in BIOS.

Gigabit Ethernet
10/100/1000Mb

Dimensions
(W) 39.5 x (D) 103 x (H) 143 mm

Weight
446 g (approximate)

Cooling
Fanless

Operating noise
No noise

Operating temperature
0℃ ~ 35℃

Non-operating temperature
-30℃ ~ 60℃

Operating humidity (Rh)
10% ~ 90% (non-condensing)

Non-operating humidity (Rh)
5% ~ 95%

Operating voltage range
100 ~ 240 VAC

Rated line frequency
50 ~ 60 Hz

Rated output current (max)
3A

Output voltage
+12V DC

Operating system
WE8S (Windows Embedded 8 Standard)

Management
Atrust Device Manager (ADM) / Atrust Client Setup (ACS)

Protocols
Citrix® ICA/HDX, Microsoft® RDP with RemoteFX, VMware® Horizon View

Regulatory
CE, FCC, CB, NRTL, VCCI