Описание, детайли - MGE Pulsar M 3000 RT3U
| Тип | Online |
| Изходна мощност | 3000 VA |
| Ефективна мощност | 2700 W |
| Мощностен фактор | 0.9 |
| Максимално изходно напрежение | 240 V |
| Тегло | 31 кг |
MGE Pulsar M 3000 RT3U
Modular on-line double conversion UPS.
Ideal protection for Servers, data storage, network equipment, Telephony - VoIP & Medical equipment - Industrial processes.
* 2,200 / 3,000VA (2/3U)
* True On Line
* 0.9 PF
* Modular UPS
* Hot Swappable batteries
* 2 Load segments
* USB and RS232 ports
Maximum availability
* Configuration. Double conversion on-line UPS with automatic by-pass and power factor correction.
* Continuous power supply. Hot swappable batteries. The HotSwap MBP (Maintenance By-Pass) module allows the battery to be replaced without interrupting the power supply.
* Powershare. The Pulsar output sockets are individually controlled to provide load-shedding to maximise the backup time. It also provides remote reboot and sequential start-up as standard.
* Long backup times. 1 to 4 EXB battery units can be added to the Pulsar M. The Pulsar 3000XL has a built-in high speed charger for additional long backup times.
Minimum total cost of ownership
* Easy operation. Multilingual display. Access to a wide range of measurements and set-up menus.
* Remote supervision. A wide range of options using the Solution-Pac supplied: SNMP and HTML, ( Network Management Card included with Netpack versions), ModBus/JBus and relay outputs.
Totally adaptable
* Format. Pulsar M is available in RT2U convertible rack/tower version (optimised for rack mounting) or RT3U (for tower or shallow rack).
* Connections. With FlexPDU and HotSwap MBP the Pulsar M can be connected by sockets or terminal blocks. They can be installed as required behind, on the side or on top of the unit.
* Compatible with high power factor loads. Pulsar M is rated for 0.9 total power factor
* Interfaces . USB + serial + remote start/stop + slot for optional communications card.
Characteristics
Rating3000 VA / 2700 W
FormatRT3U (tower / rack 3U)
Electrical characteristics
ArchitectureOn-line double conversion with automatic by-pass and power factor correction
Input voltage and frequency ranges without using batteries:
100/120/160/184 V(3) to 284V - 40 to 70 Hz
Output voltage and frequency 230V (adjustable to 200/208/220/240 V), 50/60 Hz auto-select or frequency converter mode
Connections
Inputs1 IEC C20 (16A) or terminal block on HotSwap MBP HW (Hard-Wired)
Outputs8 IEC C13 (10A) sockets + 1 IEC C19 (16A) socket on Pulsar M
Remotely controlled Powershare sockets:
2 groups of 2 x IEC C13 (10A) on Pulsar M
Additional outputs with HotSwap MBP FR/DIN/BS/IEC/HW:
4 FR/Schuko sockets or 3 BS sockets or 6 IEC 10A sockets or terminal blocks (HW version)
Batteries Typical backup times for 50 and 70% of the VA rating
Pulsar M15 mn / 10 mn
Pulsar M+ 1 EXB60 mn / 40 mn
Pulsar M + 4 EXB190 mn / 150 mn
Battery management:
Automatic weekly test (period adjustable using LCD display or in software supplied), automatic recognition of external battery units => continuous maximisation of backup time + deep discharge protection
Interfaces
Indicators and display3 LEDs + adjustable multilingual display: display of measurements, access to control and set-up menus
Communication ports1 USB port + 1 RS232 serial port(5) + 1 mini terminal block for remote ON/OFF and emergency stop
Communications card slots1 slot for NMC Minislot 2006 card (included in Netpack version) or NMC ModBus/JBus or MC Contacts/Serial
Operating conditions, standards and approvals
Operating temperature noise level 0ТАC to 40ТАC continuous, 45 dBA
Performance - Safety - EMC:
IEC/EN 62 040-3, IEC/EN 62040-1-1, IEC/EN 60950-1 (RD), IEC/EN 62 040-2 C1 Class
ApprovalsCE, T?V GS, CB report, UL 1778 cUL CSA 22.2
Dimensions (H x W x D) / Weight
Pulsar M RT (3U)131 x 440 x 490 mm (compatible with 600 mm deep rack) / 30 kg
Pulsar M EXB RT3U131 x 440 x 490 mm (compatible with 600 mm deep rack) / 42 kg Продукт известен още и като Pulsar M 3000 RT 3 U, PulsarM3000RT3U, Pulsar M 3000 RT3 U
Modular on-line double conversion UPS.
Ideal protection for Servers, data storage, network equipment, Telephony - VoIP & Medical equipment - Industrial processes.
* 2,200 / 3,000VA (2/3U)
* True On Line
* 0.9 PF
* Modular UPS
* Hot Swappable batteries
* 2 Load segments
* USB and RS232 ports
Maximum availability
* Configuration. Double conversion on-line UPS with automatic by-pass and power factor correction.
* Continuous power supply. Hot swappable batteries. The HotSwap MBP (Maintenance By-Pass) module allows the battery to be replaced without interrupting the power supply.
* Powershare. The Pulsar output sockets are individually controlled to provide load-shedding to maximise the backup time. It also provides remote reboot and sequential start-up as standard.
* Long backup times. 1 to 4 EXB battery units can be added to the Pulsar M. The Pulsar 3000XL has a built-in high speed charger for additional long backup times.
Minimum total cost of ownership
* Easy operation. Multilingual display. Access to a wide range of measurements and set-up menus.
* Remote supervision. A wide range of options using the Solution-Pac supplied: SNMP and HTML, ( Network Management Card included with Netpack versions), ModBus/JBus and relay outputs.
Totally adaptable
* Format. Pulsar M is available in RT2U convertible rack/tower version (optimised for rack mounting) or RT3U (for tower or shallow rack).
* Connections. With FlexPDU and HotSwap MBP the Pulsar M can be connected by sockets or terminal blocks. They can be installed as required behind, on the side or on top of the unit.
* Compatible with high power factor loads. Pulsar M is rated for 0.9 total power factor
* Interfaces . USB + serial + remote start/stop + slot for optional communications card.
Characteristics
Rating3000 VA / 2700 W
FormatRT3U (tower / rack 3U)
Electrical characteristics
ArchitectureOn-line double conversion with automatic by-pass and power factor correction
Input voltage and frequency ranges without using batteries:
100/120/160/184 V(3) to 284V - 40 to 70 Hz
Output voltage and frequency 230V (adjustable to 200/208/220/240 V), 50/60 Hz auto-select or frequency converter mode
Connections
Inputs1 IEC C20 (16A) or terminal block on HotSwap MBP HW (Hard-Wired)
Outputs8 IEC C13 (10A) sockets + 1 IEC C19 (16A) socket on Pulsar M
Remotely controlled Powershare sockets:
2 groups of 2 x IEC C13 (10A) on Pulsar M
Additional outputs with HotSwap MBP FR/DIN/BS/IEC/HW:
4 FR/Schuko sockets or 3 BS sockets or 6 IEC 10A sockets or terminal blocks (HW version)
Batteries Typical backup times for 50 and 70% of the VA rating
Pulsar M15 mn / 10 mn
Pulsar M+ 1 EXB60 mn / 40 mn
Pulsar M + 4 EXB190 mn / 150 mn
Battery management:
Automatic weekly test (period adjustable using LCD display or in software supplied), automatic recognition of external battery units => continuous maximisation of backup time + deep discharge protection
Interfaces
Indicators and display3 LEDs + adjustable multilingual display: display of measurements, access to control and set-up menus
Communication ports1 USB port + 1 RS232 serial port(5) + 1 mini terminal block for remote ON/OFF and emergency stop
Communications card slots1 slot for NMC Minislot 2006 card (included in Netpack version) or NMC ModBus/JBus or MC Contacts/Serial
Operating conditions, standards and approvals
Operating temperature noise level 0ТАC to 40ТАC continuous, 45 dBA
Performance - Safety - EMC:
IEC/EN 62 040-3, IEC/EN 62040-1-1, IEC/EN 60950-1 (RD), IEC/EN 62 040-2 C1 Class
ApprovalsCE, T?V GS, CB report, UL 1778 cUL CSA 22.2
Dimensions (H x W x D) / Weight
Pulsar M RT (3U)131 x 440 x 490 mm (compatible with 600 mm deep rack) / 30 kg
Pulsar M EXB RT3U131 x 440 x 490 mm (compatible with 600 mm deep rack) / 42 kg Продукт известен още и като Pulsar M 3000 RT 3 U, PulsarM3000RT3U, Pulsar M 3000 RT3 U