NETGEAR WNDAP350-100PES

Standards

• IEEE 802.11n draft 2.0 specification, 2.4 GHz and 5.0 GHz
• IEEE 802.11a 5.0 GHz
• IEEE 802.11g, IEEE 802.11b, 2.4 GHz
• WMM - Wi-Fi Multimedia prioritization
• Wireless Distribution System
• IEEE 802.3af Power over Ethernet (PoE)

Physical Specifications

• Dimensions: 32 x 190 x 124 mm (1.25 x 7.5 x 4.9 in)
• Weight: (. 56 kg) 1.2 lb

Physical Interfaces

• One (1) 10/100/1000BASE-T Gigabit Ethernet (RJ-45) port with Auto Uplink (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support
• Power adapter: 12V DC, 1A; plug is localized to country of sale
• Five (5) LEDs: Power, test, 100/1000 Mbps, link/ACT, 2.4 GHz band, 5.0 GHz band
• One (1) console port with standard RS-232C interface with DB-9 male connector
• Two (2) reverse SMA antenna connectors
  Note: Not recommended for use with ProSafe Antennas ANT2405, ANT2409 or ANT24D18.

Power over Ethernet Required

• Up to 12.8W

Security

• Wi-Fi Protected Access (WPA, WPA2)
• Wired Equivalent Privacy (WEP) 64-bit, 128-bit encryption
• IEEE 802.1x RADIUS authentication with EAP TLS, TTLS, PEAP
• Wireless access control to identify authorized wireless network devices
• MAC address authentication
• VPN pass-through support
• Secure SSH telnet
• Secure Sockets Layer (SSL) remote management login

Network Management

• Remote configuration and management through Web browser, SNMP or telnet with Command Line Interface (CLI)
• SNMP management supports SNMP MIB I, MIB II, 802.11 MIB and proprietary configuration MIB

Advanced Wireless Features

• Point-to-point wireless bridge mode
• Point-to-multipoint wireless bridge mode
• Repeater mode
• Simultaneous wireless bridge and access point mode
• Wireless Distribution System (WDS)
• Adjustable transmit power control (TPC) from 100 mW down to 0 mW

Warranty

• Access point: NETGEAR Lifetime Warranty
• Power supply: 3-year warranty

Package Contents

• ProSafe Dual Band Wireless Access Point (WNDAP350)
• Ethernet cable
• Wall-mount kit
• Installation guide
• Resource CD
• 12V, 1A power adapter, localized to country of sale

Ordering Information

• North America: WNDAP350-100NAS
• Europe: WNDAP350-100ISS
• UK: WNDAP350-100UKS
• Asia: WNDAP350-100AUS
• Japan: WNDAP350-100JPS

ProSupport Service Packs Available

OnCall 24x7, Category 1

• PMB0331-100 (US)
• PMB0331 (non-US)

XPressHW, Category 1

• PRR0331

This product is packaged with a limited warranty, the acceptance of which is a condition of sale. This product has been tested for quality assurance and this product or its components may have been recycled.

*Basic technical support provided for 90 days from date of purchase.

†Maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data throughput and wireless coverage will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate and wireless coverage. NETGEAR makes no express or implied representations or warranties about this product’s compatibility with any future standards.

‡"N", "Wireless-N" and "draft 802.11n" refer to compliance with IEEE 802.11n draft specification version 2.0 only.

Manufacturer link