Fortron FSP270-50SNV

Input Specifications
Voltage:
115/220-230 VAC
Frequency: 47Hz - 63Hz
Input current: 6.0 amps maximum / 115 Vrms, 60Hz;
3.0 amps maximum / 230 Vrms, 50Hz.

Output Specifications
Over-voltage protection: +5V: 6.5V (maximum);
+3.3V: 4.6V (maximum);
+12V:15.5V (maximum)
Over-current protection: +3.3V:57A maximum;
+5V:45A maximum;
+12V:20A maximum
Remote ON/OFF control: The power supply shall accept a logic collector level which
will disable / enable all output voltage (excluding +5V standby).
Power good signal: 115/230V (full load): 100 - 500 ms

General Specifications
Efficiency: 65% min.
Hold-up time: 16.6 ms minimum: at 115V / 60 Hz;
10.0 ms minimum: at 230V / 50 Hz.

Environmental Specifications
Operating conditions:
ambient temperature 0ТАC~50ТАC
Storage and
shipping conditions: ambient temperature -20ТАC~+65ТАC
Dielectric withstand: input / output 1800 VAC for 1 second,
input to frame ground 1800VAC for 1 second

Output

Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+5Vsb 0.1A 2.0A +5% 50mV P-P
-12V 0.0A 0.6A +10% 120mV P-P
+12V 1.0A 16.0A +5% 120mV P-P
+5V 1.0A 25/18A +5% 50mV P-P
+3.3V 0.5A 6.0/16.7A +5% 50mV P-P

?+3.3V & +5V total output not exeed 145W
?+3.3V & +5V & +12V total output not exeed 253W

Гаранция: 12 м. Продукт известен още и като FSP 270 50 SNV, FSP27050SNV, FSP270 50SNV, FSP 270-50SNV, FSP270-50 SNV