MSI B150M PRO-VD

MSI B150M PRO VD

CPU
Supports 6th Gen Intel® Core i3/i5/i7 processors, and Intel® Pentium® and Celeron® processors for Socket LGA1151
* Please refer to CPU Support for compatible CPU; the above description is for reference only.

Chipset
Intel® B150 Chipset

Main Memory
2 x DDR4 memory slots, support up to 32GB
- Supports DDR4 2133 MHz
Dual channel memory architecture
Supports ECC, un-buffered memory
- ECC UDIMM memory (non-ECC mode)
Supports Intel® Extreme Memory Profile (XMP)
* Hyper DIMM support is subject to the physical characteristics of individual CPUs
* DDR4 2133 MHz and higher memory modules will only run at maximum of DDR4 2133 MHz on XMP mode due to Intel® chipset limitation
* Please refer to Compatibility reports for more information of compatible memory.

Slots
1 x PCIe 3.0 x16 slot
2 x PCIe 3.0 x1 slots

Onboard Graphics
1 x DVI-D port, supports a maximum resolution of 1920x1200@60Hz
1 x VGA port, supports a maximum resolution of 2048x1536@50Hz, 2048x1280@60Hz, 1920x1200@60Hz

On-Board SATA
Intel® B150 Chipset
6 x SATA 6Gb/s ports

USB
Intel® B150 Chipset
- 6 x USB 3.1 Gen1 (SuperSpeed USB) ports (4 ports on the back panel, 2 ports available through the internal USB connector)
- 6 x USB 2.0 (High-speed USB) ports (2 ports on the back panel, 4 ports available through the internal USB connectors)

Audio
Realtek® ALC887 Codec
7.1-Channel High Definition Audio

LAN
1 x Realtek RTL8111H Gigabit LAN controller

Back Panel I/O Ports
- 1 x PS/2 keyboard/ mouse port
- 2 x USB 2.0 ports
- 4 x USB 3.1 Gen1 ports
- 1 x DVI-D port
- 1 x VGA port
- 1 x LAN (RJ45) port
- 3 x audio jacks

Internal I/O Connectors
- 1 x 24-pin ATX main power connector
- 1 x 4-pin ATX 12V power connector
- 6 x SATA 6Gb/s connectors
- 2 x USB 2.0 connectors (supports additional 4 USB 2.0 ports)
- 1 x USB 3.1 Gen1 connector (supports additional 2 USB 3.1 Gen1 ports)
- 1 x 4-pin CPU fan connector
- 1 x 4-pin system fan connectors
- 1 x Front panel audio connector
- 2 x Front panel connectors
- 1 x TPM module connector
- 1 x Serial Port connector
- 1 x Chassis Intrusion connector
- 1 x Clear CMOS jumper

Dimension
9.3 in. x 7.1 in. (23.5 cm x 18.0 cm) Micro-ATX Form Factor