Supermicro MBD-X11SSH-LN4F

SUPERMICRO MBD-X11SSH-LN4F
Product SKUs MBD-X11SSH-LN4F X11SSH-LN4F (Bulk Pack) Physical Stats Form Factor Micro-ATX Dimensions 9.6" x 9.6" (24.38cm x 24.38cm) Processor/Cache CPU Intel® 6th Generation Core i3 series Intel® Celeron® Intel® Pentium® Intel® Xeon® processor E3-1200 v5 series Socket H4 (LGA 1151) supported; CPU TDP support 80W System Memory Memory Capacity 64GB Unbuffered ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots Memory Type 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs DIMM Sizes 4GB, 8GB, 16GB Memory Voltage 1.2 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) On-Board Devices Chipset Intel® C236 SATA Intel® C236 controller for 8 SATA3 (6 Gbps) ports; RAID 0,1, 5,10 Network Controllers Quad LAN with Intel® Ethernet Controller I210-AT Graphics Aspeed AST2400 BMC Input / Output USB 6 USB 2.0 ports (2 rear, 4 via header) 5 USB 3.0 ports (2 rear, 2 via header, 1 Type A) Video Output 1 VGA 1 Aspeed AST2400 BMC Serial Port / Header 2 COM Ports (1 rear, 1 header) TPM Header Expansion Slots PCI-E 1 PCI-E 3.0 x8 (in x16 slot) 1 PCI-E 3.0 x8 1 PCI-E 3.0 x4 (in x8 slot) M. 2 Interface: PCIe 3.0 x2 M. 2 Form Factor: 2280 System BIOS BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS BIOS Features Plug and Play (PnP) APM 1.2 PCI 2.3 DMI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.7. 1 UEFI 2.3. 1 RTC (Real Time Clock) Wakeup Management Software Intel® Node Manager, IPMI2.0, NMI, SPM, SSM, SUM, SuperDoctor® 5, Watchdog Power Configurations ACPI Power Management Power-on mode for AC power recovery PC Health Monitoring Voltage +12V, +3.3V, +5V, +5V standby, Chassis intrusion header, Monitors CPU voltages, Supports system management utility, System level control, VBAT FAN 5x 4-pin fan headers (up to 5 fans), Fan speed control, Overheat LED indication, Thermal control tachometer fan connectors Temperature PECI Thermal Monitor 2 (TM2) support Monitoring for CPU and chassis environment CPU thermal trip support LED CPU / System Overheat LED UID/Remote UID Other Features Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, M. 2 NGFF connector, VHD, WOL Operating Environment Operating Temperature Range 0°C ~ 50°C (32°F ~ 122°F) Non-Operating Temperature Range -40°C - 70°C (-40°F - 158°F) Operating Relative Humidity Range 8% - 90% (non-condensing) Non-Operating Relative Humidity Range 5% - 95% (non-condensing)

 

.