Lenovo 7ZT7A00537

Specifications

The Intel X710 adapters have the following specifications:

• Empty SFP+ cages for 10GbE connection supporting SFP+ transceivers or DAC cables (except the T4 adapter which has RJ45 ports)


• Form factor:
  
  
  
  • X710-DA4: Full-height half-length adapter
  
  
  • All other standard PCIe adapters: Low profile adapter
  
  
  • All ML2 adapters: Low profile adapter
  
  
  • AnyFabric: AnyFabric adapter form factor
  
  
  
  


• Host interface:
  
  
  
  • PCI Express 3.0; x8
  
  
  • PCI Power Management/ACPI Extensions
  
  
  • TLP Processing Hint (TPH) Support
  
  
  • MSI-X Support
  
  
  • Energy Efficient Ethernet
  
  
  
  


• Performance:
  
  
  
  • Achieves wire-rate throughput on smaller payload sizes (>64 bytes)
  
  
  • Standard stack Latency: ~7 s
  
  
  • Kernel- Bypass Latency: ~3 s
  
  
  • Small Packet Developers Tool Kit
  
  
  
  


• Virtualization features:
  
  
  
  • Microsoft Network Virtualization that uses Generic Routing Encapsulation (NVGRE)
  
  
  • VMware Virtual Extensible LAN (VXLAN)
  
  
  • Intel Virtual Technology (VT) with VMDq for virtualization
  
  
  • SR-IOV direct assignment support
  
  
  • Virtual Bridging Support: VEPA/802.1Qbg, BPE/802.1Qbh
  
  
  • Virtual Functions: Up to 128 per device
  
  
  • Hardware Queue Pairs: Up to 1.5K
  
  
  
  


• Management features:
  
  
  
  • Advanced filtering capabilities (IPv4, IPv6)
  
  
  • SNMP
  
  
  • RMON statistic counters
  
  
  • Wake on LAN support (WoL support is for ML2 and AnyFabric adapters only; first port only)
  
  
  • NC-SI for IMM shared management port connectivity through port 1 (NCSI support is for ML2 and AnyFabric adapters only)
  
  
  
  


• Additional features:
  
  
  
  • Jumbo Frame Support: 9728 bytes
  
  
  • VLAN support
  
  
  • Flow Control
  
  
  • 1588 Time Synchronization Support
  
  
  
  


• TCP/IP Layer 2 features:
  
  
  
  • Receive Side Scaling (RSS)
  
  
  • Large Send Offload (LSO)
  
  
  • TCP/UDP/IP/SCTP Checksum Offload
  
  
  • IPv4, IPv6
  
  
  • Supports iSCSI as an iSCSI software initiator
  
  
  
  


• IEEE 802.1Q VLAN support with VLAN tag insertion, with stripping and packet filtering for up to 4096 VLAN tags.


• IEEE 802.3x flow control support.


• IEEE 802.1p Class of Service (CoS)/QoS.


• Support for Advanced Packet Filtering.


• Teaming support:
  
  
  
  • Adapter Fault Tolerance (AFT)
  
  
  • Switch Fault Tolerance (SFT)
  
  
  • Adaptive Load Balancing (ALB)
  
  
  • VM Load Balancing (VMLB)
  
  
  • IEEE 802.3ad (link aggregation control protocol)
  
  
  
  


• Intel PROSet Utility for easy configuration and management.


• UEFI and legacy PXE boot


• Option ROM:
  
  
  
  • PCIe adapter: Disabled on both ports by default.
  
  
  • ML2 adapter: Enabled on all ports by default.
  
  
  • AnyFabric adapters: Enabled on all ports by default.
  
  
  
  


• RoHS compliance that is based on latest 2014 standards.