Tuncmatik Newtech Pro X9 10KVA

Manufacturer: TUNCMATIKMnfr Part #: TSK5112Model: Newtech Pro X9 DSP 10 kVACapacity: 10 kVA / 9000 WType: On-LineInput: Voltage range Low voltage transfer:110% VAC ± 3% at 50% load, 176 VAC ± 3% at 100% load; Voltage range Low voltage correction:120% VAC ± 3% at 50% load, 186 VAC ± 3% at 100% load; Voltage range High voltage transfer:300 VAC ± 3%; Voltage range High voltage correction:290 VAC ± 3%; Frequency range:46 Hz to 54 Hz; Or 56 Hz to 64 Hz; Power factor:? ≥ 0.99 (100% load); Phase:One phase + Neutral + Soil. Output: Output voltage:208/220/230/240 VAC; Output power factor:(PF); AC voltage regulation (Battery mode):± 1%; Frequency range (Synchronous mode):46 Hz to 54 Hz or 56 Hz to 64 Hz; Frequency range (Battery mode):50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz; Overload Network mode:By-pass after 100-110%> 30 minutes, by-pass after 110-130% 5 minutes, > 130%; Overload Battery mode:Closes after 100-110%> 3dK, closes after 110-130%> 30 seconds, > 130%; Current peak ratio (Crest factor):3/1 max; Harmonic distortion:≤ 3% THD (linear load), ≤ 5% THD (non-linear load); Transfer Time By-pass ↔ Inverter:0 ms; Transfer Time Inverter ↔ By-pass:0 ms; Waveform (Battery mode):Full sine wave. Alarms: Alarm:Battery mode, Low battery, Overload, FaultDisplay: Display Type:LCD Panel; LCD Panel:UPS status, Load level, Battery level, Input / Output voltage, Discharge counter, Error status. Battery: Standard model Type & number:12V 9Ah x 20; Standard model Charging time:9 hours to 90% capacity; Standard model Charge current:2.0 A ± 10%; Standard model Charge voltage:273 VDC ± 1% (for 20 batteries); Long-time model Type & number:Medicine; Long model Charging time:Depends on external battery capacity; Long-time model Charging current:6.0 A ± 10%; Long-time model Charge voltage:273 VDC ± 1% (for 20 batteries). Environment: Operating temperature:0-40 ° C; Moisture:0-95% relative humidity (non-condensing); Noise level: