Kingston ValueRAM 4GB DDR4 2133MHz KVR21N15S8/4BK

Kingston KVR21N15S8/4BK
4GB 1Rx8 512M x 64-Bit PC4-2133
CL15 288-Pin DIMM

Description:
This document describes ValueRAM's 512M x 64-bit (4GB)
DDR4-2133 CL15 SDRAM (Synchronous DRAM), 1Rx8,
memory module, based on eight 512M x 8-bit FBGA
components. The SPD is programmed to JEDEC standard
latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin
DIMM uses gold contact fingers. The electrical and mechanical
specifications are as follows:

Features:
Power Supply: VDD=1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD=2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB: Height 1.23 (31.25mm)

Specifications:
CL(IDD): 15 cycles
Row Cycle Time (tRCmin): 46.5ns(min. )
Refresh to Active/Refresh
Command Time (tRFCmin): 260ns(min. )
Row Active Time (tRASmin): 33ns(min. )
Maximum Operating Power: TBD W*
UL Rating: 94 V - 0
Operating Temperature: 0C to +85C
Storage Temperature: -55C to +100C