Kingston HyperX FURY 8GB DDR4 2666MHz HX426C16FW2/8

Kingston HyperX Fury White HX426C16FW2/8

HyperX HX426C16FW2/8 is a 1G x 64-bit (8GB) DDR4-2666 CL16 DDR4-2666 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Total kit capacity is 16GB. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the
Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:

CL(IDD) : 16 cycles
Row Cycle Time (tRCmin) : 45.75ns(min. )
Refresh to Active/Refresh Command Time (tRFCmin): 350ns(min. )
Row Active Time (tRASmin) : 29.25ns(min. )
Maximum Operating Power : TBD W*
UL Rating : 94 V - 0
Operating Temperature : 0 C to +85 C
Storage Temperature : -55 C to +100 C

Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD = 2.25V to 3.6V
On-Die termination (ODT)
16 internal banks; 4 groups of 4 banks each
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
Height 1.340 (34.04mm), w/heatsink