Kingston HyperX Predator RGB 32GB (4x8GB) DDR4 3600MHz HX436C17PB3AK4/32

32GB (8GB 1G x 64-Bit x 4 pcs. )DDR4 3600CL17 288 Pin DIMM Kit

DESCRIPTION:

HyperX HX436C17PB3AK4/32 is a kit of four 1G x 64-bit (8GB) DDR4-3600 CL17 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Total capacity is 32GB. Each module has been tested to run at DDR4-3600 at a low latency timing of 17-18-18 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:

XMP TIMING PARAMETERS:

JEDEC: DDR4-2400 CL17-17-17 @1.2V
XMP Profile #1: DDR4-3600 CL17-18-18 @1.35V
XMP Profile #2: DDR4-3000 CL15-17-17 @1.35V

CL(IDD): 17 cycles
Row Cycle Time (tRCmin): 45.75ns(min. )
Refresh to Active/Refresh/Command Time (tRFCmin): 350ns(min. )
Row Active Time (tRASmin): 32ns(min. )
Maximum Operating Power: TBD W*
UL Rating: 94 V - 0
Operating Temperature: 0o C to +70o C
Storage Temperature: -40o C to +85o C

FEATURES:

Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.4V to 3.3V
On-Die termination (ODT)
16 internal banks; 4 groups of 4 banks each
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
HyperX Infrared Sync working distance 18mm
Factory preset RGB wave lighting effect
Height 1.661 (42.20mm)