Zyxel WAC6103D-I

Specifications
Model WAC6103D-I

Product name: 802.11ac Dual Radio Dual-optimized Antenna 3x3 Access Point

Main Design:
Wireless frequency: 2.4 and 5 GHz
Radio: 2

RF Specifications
Frequency band:
2.4 GHz (IEEE 802.11 b/g/n)
5 GHz (IEEE 802.11 a/n/ac)

802.11n/ac premium features
3x3 Multiple-Input Multiple-Output (MIMO) with three spatial streams
Maximal Ratio Combining (MRC)
20-, 40- and 80-MHz channels
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
Cyclic Delay diversity (CSD) support
Maximum Likelihood Demodulation (MLD) support
Low Density Parity Check (LDPC) support

Antenna system: Dual-optimized internal antenna
Antenna gain
Ceiling: 2.4 GHz 3 dBi; 5 GHz 4 dBi
Wall: 2.4 GHz 4 dBi; 5 GHz 5 dBi
Support data rate 802.11a/g: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
802.11b: 1, 2, 5.5 and 11 Mbps
802.11n: up to 450 Mbps in MCS23 (40 MHz)
802.11ac: up to 1300 Mbps in MCS9 (80 MHz)
Receive sensitivity Min. Rx sensitivity to -102 dBm

Interfaces
Number of 10/100/1000M LAN: 2 x switch ports
Console port: 4-Pin serial
PoE: Yes
PoE powe: draw 12.48 W (802.3at PoE)*

WLAN Features
WLAN maximum throughput: Up to 900 Mbps
Mesh AP (By License): Yes
Mesh AP for multiple: SSID with
VLAN (through tunnel mode): Yes
Fast roaming Pre-authentication and PMK caching

Wireless Security
WEP: Yes
WPA/WPA2-PSK: Yes
WPA/WPA2-Enterprise: Yes
WMM(Wi-Fi certified): Yes

Wireless Security
WLAN access control list: Yes
EAP types EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST, EAP-AKA and EAP-SIM
IEEE 802.1X: Yes
Number of SSID: 16
Web authentication: Yes
MAC filtering: Yes
Layer-2 isolation: Yes
RADIUS authentication: Yes
Microsoft AD authentication: Yes
LDAP authentication: Yes
MAC authentication: Yes
Rogue AP detection: Yes
Rogue AP containment: Yes

Network
IPv6 host: Yes
VLANs: Yes
DHCP client: Yes

QoS
WMM: Yes
WMM power save: Yes
DiffServ marking: Yes

Certifications
Radio: FCC part 15C, FCC part 15E, ETSI EN 300 328, EN 301 893, LP0002
EMC: FCC part 15B, EN 301 489-1, EN 301 489-17, EN55022,
EN55024, EN61000-3-2/-3, EN60601-1-2, BSMI CNS13438
Safety: EN 60950-1, IEC 60950-1, BSMI CNS14336-1

Physical Specifications
Item Dimensions (WxDxH)(mm/in. ): 203.9 x 191.7 x 34.7/8.03 x 7.55 x 1.37
Weight (g/lb. ): 445/0.98
Packing Dimensions (WxDxH)(mm/in. ): 235 x 246 x 60/9.25 x 9.69 x 2.36
Weight (g/lb. ): 938/2.07
Included accessories Wall/ceiling mount plate

Environmental Specifications
Operating Temperature: 0°C to 50°C/32°F to 122°F
Humidity: 10% to 90% (non-condensing)
Storage Temperature: -40°C to 70°C/-40°F to 158°F
Humidity: 10% to 90% (non-condensing)