Описание на продукта
Параметри на продукта
Производител
Sennheiser
Тип
Тапи
Тип връзка
кабелни
Свързване
3.5 мм жак
Минимална честота
20 Hz
Максимална честота
18000 Hz
Чувствителност
115 dB
Номинален импеданс
20 Ohm
Дължина на кабела
130 см
Микрофон
Да
Регулатор за усилване
не
Тегло
18 г
Параметри на продукта
Производител
Sennheiser
Тип
Тапи
Тип връзка
кабелни
Свързване
3.5 мм жак
Минимална честота
20 Hz
Максимална честота
18000 Hz
Чувствителност
115 dB
Номинален импеданс
20 Ohm
Дължина на кабела
130 см
Микрофон
Да
Регулатор за усилване
не
Тегло
18 г
Описание на продукта
IE 40 PRO
The high expectations placed on in-ear monitoring are effortlessly satisfied by the IE 40 PRO thanks to an advanced dynamic driver system. The innovative diaphragm delivers a warm sound, yet powerful and precise, even in extremely loud environments. Even at maximum sound pressure levels, the signal remains distortion-free and precisely defined. The IE 40 PRO is a superior monitoring device for musicians and DJs that adapts to every ear. A compact design combines a secure fit with excellent wearing comfort. It’s robust construction is designed to be suitable for the rigors of stage use from the connection to the cable duct.
The IE 40 PRO improves the way you perform by enhancing the way you hear.
Key Features
Innovative, dynamic 10mm broadband transducer for powerful, precise monitoring
Dynamic driver system reduces acoustic stress factors through homogenous, distortion-free reproduction
Secure fit and high level of wearing comfort; Innovative single driver design enables a slim and ergonomic construction
Excellent shielding thanks to optimized earpiece and flexible silicone and foam tips
Cable with innovative internal cable duct (patent pending), fit for stage use
Dynamic drivers of the next generation
Whereas most IEM systems use multi-driver solutions derived from hearing aids, the IE 40 PRO uses a next-generation dynamic single-driver. As it turns out, the frequency range does not have to be split up into sections but remains harmonious as a whole. It sounds well-rounded, and its frequency spectrum has been considerably expanded. There are no distortions because the special diaphragm – unlike the more rigid drive principle of the multi-way drivers – resonates easily even at maximum sound levels. Phase problems and dissonances in the inner ear are therefore also precluded. The difference is audible, even noticeable in the entry-level model.
Small but mighty. Comfortable.
A big sound, but small enough to fit your ear: the advanced driver system brings a considerably expanded sound spectrum to the ears of musicians, sound engineers and DJs. The design, on the other hand, has been optimized, checked against hundreds of ear shapes, and redesigned. The result is flat, sits securely and does not ‘carry any weight, ’ even during lengthy sessions.
Reinvented down to the last detail
Without monitoring sound, there is no performance. The IE 40 PRO is designed to provide the necessary reliability. To this end we have even reinvented stage-compatible cabling – the internal cable duct is a unique feature (patent pending). In short: the new system meets high expectations and withstands high stresses.
Specifications:
Impedance
20 Ohms
Frequency response
20 - 18,000 Hz
Sound pressure level (SPL)
115 dB (1kHz / 1 Vrms)
THD, total harmonic distortion
< 0.1 % (1kHz, 94dB)
Cable length
1.3m (4.3 feet)
Transducer principle
Dynamic
Weight
18 g (0.6 oz)
Attenuation
< 26 dB
The high expectations placed on in-ear monitoring are effortlessly satisfied by the IE 40 PRO thanks to an advanced dynamic driver system. The innovative diaphragm delivers a warm sound, yet powerful and precise, even in extremely loud environments. Even at maximum sound pressure levels, the signal remains distortion-free and precisely defined. The IE 40 PRO is a superior monitoring device for musicians and DJs that adapts to every ear. A compact design combines a secure fit with excellent wearing comfort. It’s robust construction is designed to be suitable for the rigors of stage use from the connection to the cable duct.
The IE 40 PRO improves the way you perform by enhancing the way you hear.
Key Features
Innovative, dynamic 10mm broadband transducer for powerful, precise monitoring
Dynamic driver system reduces acoustic stress factors through homogenous, distortion-free reproduction
Secure fit and high level of wearing comfort; Innovative single driver design enables a slim and ergonomic construction
Excellent shielding thanks to optimized earpiece and flexible silicone and foam tips
Cable with innovative internal cable duct (patent pending), fit for stage use
Dynamic drivers of the next generation
Whereas most IEM systems use multi-driver solutions derived from hearing aids, the IE 40 PRO uses a next-generation dynamic single-driver. As it turns out, the frequency range does not have to be split up into sections but remains harmonious as a whole. It sounds well-rounded, and its frequency spectrum has been considerably expanded. There are no distortions because the special diaphragm – unlike the more rigid drive principle of the multi-way drivers – resonates easily even at maximum sound levels. Phase problems and dissonances in the inner ear are therefore also precluded. The difference is audible, even noticeable in the entry-level model.
Small but mighty. Comfortable.
A big sound, but small enough to fit your ear: the advanced driver system brings a considerably expanded sound spectrum to the ears of musicians, sound engineers and DJs. The design, on the other hand, has been optimized, checked against hundreds of ear shapes, and redesigned. The result is flat, sits securely and does not ‘carry any weight, ’ even during lengthy sessions.
Reinvented down to the last detail
Without monitoring sound, there is no performance. The IE 40 PRO is designed to provide the necessary reliability. To this end we have even reinvented stage-compatible cabling – the internal cable duct is a unique feature (patent pending). In short: the new system meets high expectations and withstands high stresses.
Specifications:
Impedance
20 Ohms
Frequency response
20 - 18,000 Hz
Sound pressure level (SPL)
115 dB (1kHz / 1 Vrms)
THD, total harmonic distortion
< 0.1 % (1kHz, 94dB)
Cable length
1.3m (4.3 feet)
Transducer principle
Dynamic
Weight
18 g (0.6 oz)
Attenuation
< 26 dB
Липсва или е неправилен важен параметър? Предоставената информация е само за ориентиране, затова ви съветваме да проверите дали предлаганият продукт има ключовите параметри от които се нуждаете, преди да купите от магазина по ваш избор. Въпреки че се стремим към максимална точност на информацията, за съжаление не можем винаги да гарантираме 100% съответствие. Цените на продуктите са с включен ДДС.
Продуктът все още няма отзиви.