Dell X1052 210-AEIO

10/100/1000Base-T auto-sensing Gigabit Ethernet switching ports 48
SFP/SFP + fiber ports 4 SFP/SFP +
Power over Ethernet (PoE) ports N
PoE powered N
Power reduction for short cables or inactive connections S
Autonegotiation for speed, duplex mode and flow control S
Auto-MDI/MDIX mode and flow control S
Switch fabric capacity: Up to 176 Gbps
Forwarding rate: 131 Mpps
Priority queues per port 8
Dimensions (H x W x D) 1.71 in x 17.1 in x 10.63 in (43.5 mm x 434.0 mm x 270.0 mm)
Rack mount: 1RU
Unit weight: 3.80 Kg
Fans: Design 2 (rear)
Power supply 100W
Power (max) 60.2W
Power BTU/hr 205.2

Port attributes:

Supports Virtual Cable Diagnostics by Marvell and fiber transceiver diagnostics to provide advanced troubleshooting capabilities for your cable infrastructure
Integrated LEDs for improved visual monitoring and analysis

Performance:

MAC addresses: 16K
Packet buffer memory: 1 Mb

VLAN:

Supports up to 4096 port-based VLANs. Honors all 4096 VLAN tags.

Quality of service:

Honor 802.1p values and honor IP DSCP values
Supports strict priority and configurable weighted round robin (WRR) scheduling across queues

Link aggregation:

Industry-standard link aggregation adhering to IEEE 802.3ad standards (static and dynamic, LACP)
Supports 12 link aggregation groups and up to 4 ports per group

Management:

Local password and restricted IP addresses for secure access to the switch Port mirroring provides the capability of mirroring 8 source ports and VLAN mirroring to improve network traffic monitoring and troubleshooting.

Internal DHCP Server

DHCP client support allows for simplified IP address assignment when used with a DHCP server
Switch software can be easily uploaded to the switch through the web-management interface
Configurations can be easily uploaded to and from the switch through the intuitive web-management interface
Port statistics available through industry-standard RMON
Switch is factory-configured as an unmanaged switch, but can be easily configured as a web-managed switch with the push of a button
Jumbo frame support for packets up to 9,000 bytes
Broadcast storm control to help eliminate network traffic storms

Environmental operating conditions:

100% Lead-free
Operating temperature: 32 to 113F (0 to 45C)
Storage temperature: -20º C to 70º C (-4º F to 158º F)
Operating relative humidity: 10% to 90% noncondensing

Standards and additional features supported:

IEEE 802.3ac VLAN tagging
IEEE 802.3ad Link aggregation with static LAG support
IEEE 802.1W Rapid Spanning Tree (1)
IEEE 802.1D Spanning Tree (1)
IEEE 802.1Q Port-based VLANs
IEEE 802.1v Protocol-based VLANs
IEEE 802.1p Ethernet priority with user provisioning and mapping
IEEE 802.1X Port authentication
IEEE 802.3x Flow control
RFC 826 ARP
RFC 854 Telnet
RFC 855 Telnet option
RFC 1155 SMIv1
RFC 1157 SNMP
RFC 1213 MIB II Updated by RFCs 2011, 2012 and 2013
RFC 2579 Textual conventions for SMI v2
RFC 2580 Conformance statements for SMI v2
RFC 2819 RMON
RFC 3164 BSD Syslog Protocol
RFC 3416 Management Information Base (MIB) for the Simple Network Management Protocol (SNMP) (December 2002)
RFC 768 UDP
RFC 783 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 951 BOOTP
RFC 1533 Including 1534, Interoperation between BOOTP and DHCP
DHCP server
RFC 2131 Dynamic Host Configuration Protocol
RFC 2132 DHCP options and BOOTP vendor extensions
RFC 950 Internet Standard Subnetting Procedure
RFC 1123 Requirements for internet hosts
RFC 1042 A standards for transmission of IP datagrams over IEEE 802 networks
RFC 1071 Computing the internet checksum
IGMPv2 snooping
MLD snooping
GARP
GMP snooping
Jumbo frames
IPv6 support
IPv4 and IPv6 Static routing
USB support for update of firmware/configuration
Auto-update of firmware and configuration, from TFTP server/USB
Console port
Authentication via TACACS+ server
Port security
Dynamic ARP Inspection
DHCP Snooping
SHCP Relay
ACL
Voice VLAN
Unidirectional Link Detection (UDLD)
Multiple Spanning Tree (MSTP)
LLDP and LLDP-MED
sFlow V5
Port Profile (built-in scripts)