NETGEAR GSM7248-200EUS Суич, комутатор

Упътване до адрес:
Предложен маршрут:  

Още оферти

Up to 48 Switches Can Be Managed Via a Single IP Address!

NETGEAR delivers wirespeed Gigabit performance and a full set of Layer 2 management features, as well as static routing with unsurpassed affordability. This next-generation, high-speed switch delivers maximum throughput where you need it — to high-performance workgroups at the edge of the network, or as a backbone for Fast Ethernet switches and high-speed servers in demanding small networks. The non-blocking design offers full Gigabit throughput simultaneously to all 24 or 48 10/100/1000 ports to ensure reliable performance. Flexible fiber connectivity is enabled through four combination small form-factor pluggable (SFP)** gigabit interfaces. Layer 2 management functionality delivers reliability, control, and availability. Static routing enables inter-VLAN routing and provides a faster network and more effective bandwidth management. Access control lists (L2-L4) provide robust security, while L2-L4 based QoS provides enhanced traffic management capabilities. The cost-effective NETGEAR ProSafe 24- and 48-port Gigabit L2 Managed Switch creates a more productive — and future-proof — network. With increasing bandwidth requirements from applications such as voice, video, database management, and other services that slow throughput and response time, you can unleash your network and enable maximum productivity with Gigabit Ethernet for today’s high-performance environments.

Multiple NETGEAR fully managed switches can be managed via a single IP address. Optimize bandwidth, security, and control with full Layer 2 management capabilities. Network administrators can use any combination of these features to ensure uptime, availability, bandwidth and throughput.

Full 24 or 48 10/100/1000 ports and a non-blocking design provide wire speed throughput and maximum bandwidth for the most demanding network environments. Small form-factor pluggable (SFP) modules deliver choice in 1000BASE-SX, 1000BASE-LX or 1000BASE-ZX (70Km) optics. The Layer 2 management features optimize bandwidth throughout the network – delivering Gigabit performance to systems, applications, and services. Take advantage of forwarding rates up to 71.4 million pps, and a switching capacity of 96 Gbps.

Easy to Use
Move up to Gigabit power in minutes. Use either of these solutions as a managed switch out of the box – just plug and play! All ports are auto-negotiating and support Auto Uplink technology. Choose from two easy-to-use management interface options –Web interface or a command line interface available through console or telnet. Comprehensive remote administration capabilities reduce the need for on-site administration. Easy to troubleshoot – built-in testing capability locates cable-related network problems. Additionally, up to 48 switches can be managed via a single IP address using the Web GUI interface.

Meet your management needs with SNMP (v1, v2c and v3), RMON, Command Line Interface (CLI) and completely redesigned Web-based GUI, ProSafe Control Center. Advanced features include up to 512 VLANs, DiffServ traffic prioritization and 802.1p (QoS) for Voice over IP services (VoIP), broadcast storm protection, RADIUS, 802.1x, port trunking, Rapid Spanning Tree, and link aggregation. In addition, L2-L4 based ACLs provide robust security, while static routing enables inter-VLAN routing for effective bandwidth management. Full Layer 2 implementation allows you to configure your network for maximum performance, reliability, and availability. Manageable with any popular SNMP-based management software, but optimized for NETGEAR ProSafe Network Management Software NMS100.

These products offer Layer 2 management and full Gigabit power at a compelling price. Use at the edge to improve workgroup connections, or at the core to upgrade a Gigabit Ethernet backbone - now you can afford the power your network deserves. Like all NETGEAR products, everything you need is in the box – including rack-mount kit, power and serial cables, and more.

Physical Interfaces

    RJ-45 Connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink on all ports):
    GSM7224-200 24 ports
    GSM7248-200 48 ports
    Small form-factor pluggable (SFP) modules for fiber Gigabit Ethernet interfaces:
    GSM7224-200 4 slots
    GSM7248-200 4 slots
    RS-232 console port

Layer 2 Services

    IEEE 802.1Q static VLAN (1024)
    IEEE 802.1p Class of Service (CoS)
    IEEE 802.1D Spanning Tree Protocol
    IEEE 802.1v Protocol VLAN & Port VLAN and MAC-based VLAN
    Voice VLAN
    Guest VLAN
    IP subnet-based VLAN
    IEEE 802.1 Q-in-Q
    IEEE 802.1w Rapid Spanning Tree
    IEEE 802.1s Multiple Spanning Tree
    IEEE 802.3ad Link Aggregation (LACP)
    IEEE 802.1x port access authentication
    IGMP v1, v2, v3 snooping support
    IGMP querier
    Static multicast filtering
    Ingress rate limit in 1 Kbps increments
    Weighted round robin (WRR) queue technology
    MLD v1, v2 snooping

Layer 3 Services

    Static routing


    Access Control Lists (ACL) - MAC, IP, TCP
    ACLs: L2/L3/L4
    Network storm protection including broadcast multicast and unicast traffic
    Protected ports
    MAC filtering
    Private group
    Diffserv QoS (RFC 2998)
    IEEE 802.1x port access authentication
    Port security
    DHCP snooping
    IP Source Guard
    Dynamic ARP inspection
    RADIUS (RFC 2865)
    RADIUS accounting (RFC 2866)

Switch Management Specifications

    SNMP v1, v2c, v3 with multiple IP addresses
    RFC 1157, 1902-1907
    RFC 768 UDP
    UDP relay
    RFC 854-859 telnet
    RFC 951 BOOTP
    RFC 1213 MIB II
    RFC 1757 RMON groups 1,2, 3, and 9
    RFC 1215 SNMP Traps
    RFC 1493 Bridge MIB
    RFC 1643 Ethernet Interface MIB
    RFC 1534 DHCP and BOOTP interoperation
    RFC 2131, 2132 DHCP and BOOTP
    Private Enterprise MIB
    Port mirroring support (many-to-one)
    DHCP/BOOTP relay-primary and backup (RFC 3046, option 82)
    RFC 2030 Simple Network Time Protocol (SNTP)
    DHCP server
    DHCP L2 relay
    IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
    ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED)
    DHCP relay (with backup servers)
    TFTP, SFTP, HTTP, SCP, or local USB flash firmware upgrade
    Port description
    RFC 1519 CIDR
    Proxy ARP
    DNS lookup

Single IP Address Management (firmware version 7.3 or higher)

    Manage up to 48 fully managed switches
    Feature can be used with the following models:
        FSM726E, FSM7226RS, FSM7250RS
        FSM7328S, FSM7352S, FSM7328PS, FSM7352PS
        GSM7224R, GSM7248R
        GSM7328S, GSM7328FS, GSM7352S

Performance Specifications

    Forwarding modes: Store-and-forward
    GSM7224-200: 48 Gbps; 35.7 Mpps
    GSM7248-200: 96 Gbps; 71.4 Mpps
    Switch latency: 20 us for 64-byte frames (1 G to 1 G)
    System memory: 128 MB
    Packet buffer memory:
    GSM7224-200: max support 0.75 MB buffer memory
    GSM7248-200: max support 1.5 MB buffer memory
    Code storage (flash): 32 MB
    Address database size: 8 K media access control (MAC) addresses
    Number of VLANs: 1024 (1-4093)
    Number of trunks: 64
    Number of queues: 8
    Number of static route: 32
    Number of routed VLANs: 32
    Number of ARP entries: 480
    Number of ACL rules: 224
    Jumbo frame support: up to 9 K packet size
    Acoustic noise:
    GSM7224-200: 38.6 dB
    GSM7248-200: 48.8 dB
    Heat dissipation:
    GSM7224-200: 131.439 BTU/hr
    GSM7248-200: 244.101 BTU/hr
    Mean time between failures (MTBF):
    GSM7224-200: 239,032 hours (~27 years)
    GSM7248-200: 162,303 hours (~19 years)

User Interfaces

    Command Line Interface (CLI) via console port (5 sessions)
    Web-based management via embedded HTTP server protected with Secure Sockets Layer
    (SSLv3) or Transport Layer Security (TLS v1)
    Telnet remote login (5 sessions) securable with Secure Shell (SSH v1.5, v2)


    Per port: Speed, link, activity
    Per device: Power, fan, RPS status

Network Standards Compatibility

    IEEE 802.3i 10BASE-T
    IEEE 802.3u 100BASE-TX, 100BASE-FX
    IEEE 802.3ab 1000BASE-T
    IEEE 802.3z 1000BASE-X
    IEEE 802.3x flow control

Physical Specifications

    Dimensions (w x d x h):
    440 x 205 x 43 mm
    (17.3 x 8.1 x 1.6 in)
    GSM7224-200: 3.65 kg (8.03 lb)
    GSM7248-200: 4.15 kg (9.13 lb)

Environmental Specifications

    Operating temperature: 0° to 55° C (32° to 131° F)
    Storage temperature: -20° to 70° C (-4° to 158° F)
    Operating humidity: 90% maximum relative humidity, non-condensing
    Storage humidity: 95% maximum relative humidity, non-condensing
    Operating altitude: 3,000 m (10,000 ft) maximum
    Storage altitude: 3,000 m (10,000 ft) maximum

Electrical Specifications

    Power consumption:
    GSM7224-200 38.5W maximum
    GSM7248-200 71.5W maximum
    Redundant power supply input: 12V

Electromagnetic Emissions

    CE mark
    EN 55022 Class A - Emissions
    EN 55024 - Immunity
    FCC Part 15 Class A
    VCCI Class A

Electromagnetic Safety

    CE mark
    EN 60950-1
    UL/cUL 60950-1


    NETGEAR Lifetime Warranty†


    ProSafe AGM731F 1000BASE-SX SFP GBIC
    ProSafe AGM732F 1000BASE-LX SFP GBIC
    ProSafe AGM733 1000BASE-ZX SFP GBIC
    100FX SFP LC transceiver

Package Contents

    ProSafe Gigabit L2 Managed Switch (GSM7224v2 or GSM7248v2)
    Null modem cable
    Rubber footpads
    Power cable
    Rack-mount kit
    Installation guide
    Resource CD-ROM
    Warranty/support information card

Ordering Information

    North America

ProSupport Service Packs Available


    OnCall 24x7, Category 2:
    XPressHW, Category 2


    OnCall 24x7, Category 3
    XPressHW, Category 3
        PRR0333-100 Продукт известен още и като GSM 7248 200 EUS, GSM7248200EUS, GSM7248 200EUS, GSM 7248-200EUS, GSM7248-200 EUS
Задайте въпрос

Данните и цените за продуктите предлагани от нашите партньори служат за напътствие и обща информация. Моля, преди покупка проверете дали съответстват на публикуваните данни от сайта на магазина или производителя. За евентуалните неточности и грешки не носим отговорност.