ARCTIC Freezer A35 ARGB (ACFRE00115A)

Arctic Freezer A35 A-RGB

Compact performance meets modern design

Optimised performance meets modern, black design and whisper-quiet operation. With its four offset heat pipes, the single-tower CPU cooler enables fast heat transfer into the heat sink, where it can be efficiently dissipated by means of a 120 mm fan.

Ultimate Performance Thermal Paste

The Freezer A35 A-RGB comes with a 0.8 g syringe of the new MX-5. ARCTIC's Ultimate Performance thermal paste enables a particularly thin layer thickness due to its low viscosity and particle size and significantly reduces the heat build-up between the heat spreader of the CPU and the cooler. At the same time, it is neither conductive nor capacitive and therefore absolutely safe to use, even for beginners.

Fan optimised for heat sinks

The fan installed in the Freezer A35 A-RGB benefits from all the advantages of the P-fans. With their low-vibration, power-saving motor and hydrodynamic plain bearing, they combine quiet and efficient operation. Despite its high fin density, the fan guarantees a high static pressure with its focused air flow and is therefore ideal for use on radiators and heat sinks. The speed of the fan can be dynamically controlled via PWM and can thus be optimally adapted to any scenario.

Improved installation and unlimited RAM clearance

The Freezer A35 A-RGB is a socket-specific installation variant for AM4. This reduces unnecessary mounting material and additionally simplifies the installation. ARCTIC uses an improved and simplified mounting system with spring-loaded screws for the Freezer A35 A-RGB. This achieves optimum contact pressure and even distribution of the thermal compound. Due to its compact design, it allows unrestricted RAM compatibility when installed.

Make your system shine

The Freezer A35 A-RGB fan has 12 digital A-RGB LEDs in the fan hub. These can be controlled autonomously from each other and enable the iconic rainbow effect as well as countless other lighting options. The fan can be connected directly via a 5 V 3-pin RGB header on the mainboard and is compatible with the software and connectors of leading mainboard manufacturers. Alternatively, the cooler can also be illuminated via an external controller (A-RGB controller link) and synchronised with the lighting of other hardware.

Specifications:

Compatibility

AMD Socket:

AM4

Ram Clearance:

unlimited

Operating Ambient Temperature:

0 - 40 °C

Heatsink

Heat Pipes:

4

Fin Material:

Aluminum

Number of Fins:

54

Fin Thickness:

0,4 mm

Thermal Paste:

MX-5 (0.8g)

 

Fan

Fan Size:

120

Fan Speed:

200 - 1700 rpm

Fan Bearing:

Fluid Dynamic Bearing

Noise Level:

0.35 Sone

Current:

0.11 A

Connector:

4-Pin

Size & Weight

Lenght:

91 mm

Width:

133 mm

Height:

158.5 mm

Weight:

734 g