Thermaltake Smart Pro RGB 850W Bronze (PS-SPR-0850FPCBEU-R)

Thermaltake Smart Pro RGB 850W Bronze
PS-SPR-0850FPCBEU-R

Smart Pro RGB 850W Bronze Fully Modular
Thermaltake, as the pioneer who incorporates RGB lights into PSU, has launched the Thermaltake Smart Pro RGB Bronze Series, coming with a pre-installed, patented Riing 14 RGB fan with 5 lighting modes to choose from and built-in memory.

Featuring capacities ranging from 650W to 850W and 80 PLUS Bronze certification, Smart Pro RGB Bronze Series adopts the high quality components and fully modular design that always accommodate any mainstream build under any circumstance.

One Button to Your Desired Color
By pressing the RGB lighting button, the fan color can be switched among an RGB Cycle with variants including Solid Red, Green, Blue, White, and a LED Off mode. The fan is also constructed with a built-in memory function, saving the color applied and insuring the same color selection every time you boot your PC.

Ultra Quiet Smart Zero Fan
Smart Zero Fan ensures zero noise when the fan operates below approximately 10% working load to minimize audible noise.
The fan will operate when the power supply working load over 10%. A switch is provided for those who prefer the fan to spin constantly.

80 PLUS Bronze Certified and Skylake Ready
Deliver up to 85% efficiency under real world load conditions to promise lowest power losses. Additionally, Smart Pro RGB 850W Bronze has been optimized to work with Intel’s latest, Sixth-generation Skylake processors to achieve maximum energy saving.

P/N PS-SPR-0850FPCBxx-R
Short P/N SPR-0850F-R
Model SPR-850AH3FSB-R
Type ATX 12V v2.4 and EPS v2.92
Max. Output Capacity 850W
Peak Output Capacity 1020W
Color Black
Dimension （ W / H / D ） 150mm(W) x 86mm(H) x 170mm(D)
PFC （Power Factor Correction） Active PFC
Power Good Signal 100-500 msec
Hold Up Time > 16msec at 75% load
Input current 15A
Input Frequency Range 50Hz - 60Hz
Input Voltage 100V – 240V~
Operating Temperature 0°C to + 40°C
Operating Humidity 20% to 90%, non-condensing
Storage Temperature -40°C to + 70°C
Storage Humidity 20% to 95%, non-condensing
Cooling System 14cm hydraulic bearing fan
Efficiency Meet 80 PLUS® Bronze at 115Vac input.
MTBF 100,000 hrs minimum
Safety Approval CE/cTUVus/TÜV SÜD/FCC/CCC/BSMI/EAC
Pin Connector PCI-E 6+2pin X 4
Protection OCP, OVP, UVP, OPP, SCP, OTP