GIGABYTE GA-Z77X-D3H

CPU
        Support for Intel® Core i7 processors/Intel® Core i5 processors/ Intel® Core i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1155 package
Chipset
        Intel® Z77 Express Chipset
Memory
        4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
        Dual channel memory architecture
        Support for DDR3 2400(OC)/1600/1333/1066 MHz memory modules
        Support for non-ECC memory modules
        Support for Extreme Memory Profile (XMP) memory modules
VGA
        1 x D-Sub port
        1 x DVI-D port, supporting a maximum resolution of 1920x1200
        * The DVI-D port does not support D-Sub connection by adapter.
        1 x HDMI port, supporting a maximum resolution of 1920x1200
Expansion Slots
        1 x PCI Express x16 slot, running at x16 (PCIEX16)
        (The PCIEX16 slot conforms to PCI Express 3.0 standard. )
        * The PCI Express x16 slot supports up to PCI Express 2.0 standard when an Intel 32nm (Sandy Bridge) CPU is installed.
        1 x PCI Express x16 slot, running at x8 (PCIEX8)
        * The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot will operate at up to x8 mode.
        1 x PCI Express x16 slot, running at x4 (PCIEX4)
        3 x PCI Express x1 slots
        (PCIEX4 and PCIEX1 slots conform to PCI Express 2.0 standard. )
        1 x PCI slots
        Support for 2-Way AMD CrossFireX/NVIDIA SLI technology (PCIEX16 and PCIEX8)
        * The PCIEX16 slot operates at up to x8 mode when AMD CrossFireX/NVIDIA SLI is enabled.
Connectors
        1 x 24-pin ATX main power connector
        1 x 4-pin ATX 12V power connector
        4 x SATA 6Gb/s connectors
        4 x SATA 3Gb/s connectors
        1 x mSATA connector
        1 x CPU fan header
        3 x system fan headers
        1 x front panel header
        1 x front panel audio header
        1 x S/PDIF Out header
        1 x USB 3.0/2.0 header
        2 x USB 2.0/1.1 headers
        1 x serial port header
        1 x Clear CMOS jumper
        1 x Trusted Platform Module (TPM) header
Storage Interface
        Chipset:
        2 x SATA 6Gb/s connectors (SATA3 0/SATA3 1) supporting up to 2 SATA 6Gb/s devices
        4 x SATA 3Gb/s connectors (SATA2 2~SATA2 5) supporting up to 4 SATA 3Gb/s devices
        1 x mSATA connector
        * The SATA2 5 connector will become unavailable when the mSATA connector is installed with a solid state drive.
        Support for RAID 0, RAID 1, RAID 5, and RAID 10
        * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.
        1 x Marvell 88SE9172 chip:
        2 x SATA 6Gb/s connectors (GSATA3 6/GSATA3 7) supporting up to 2 SATA 6Gb/s devices
        Support for RAID 0 and RAID 1
Audio
        VIA VT2021 codec
        High Definition Audio
        2/4/5.1/7.1-channel
        Support for S/PDIF Out
LAN
        1 x Atheros GbE LAN chip (10/100/1000 Mbit)
Rear Panel I/O Ports
        1 x PS/2 keyboard/mouse port
        1 x D-Sub port
        1 x DVI-D port
        1 x HDMI port
        6 x USB 3.0/2.0 ports
        2 x USB 2.0/1.1 ports
        1 x RJ-45 port
        1 x optical S/PDIF Out connector
        5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In/Mic In, Line Out)
BIOS
        2 x 64 Mbit flash
        Use of licensed AMI EFI BIOS
        Support for DualBIOS
        PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
Form Factor
        ATX
Dimensions
        30.5cm x 24.4cm
Package
        Box