Kingston HyperX Savage 16GB (2x8GB) DDR4 2800MHz HX428C14SB2K2/16

HyperX HX428C14SB2K2/16

HyperX HX428C14SB2K2/16 is a kit of two 1G x 64-bit (8GB)
DDR4-2800 CL14 SDRAM (Synchronous DRAM) 2Rx8, memory
modules, based on sixteen 512M x 8-bit FBGA components per
module. Total kit capacity is 16GB. Each module supports
Intel® XMP (Extreme Memory Profiles). Each module has
been tested to run at DDR4-2800 at a low latency timing of
14-16-16 at 1.35V. The SPDs are programmed to JEDEC
standard latency DDR4-2133 timing of 15-15-15 at 1.2V.
Each 288-pin DIMM uses gold contact fingers. The JEDEC
standard electrical and mechanical specifications are as
follows:

XMP TIMING PARAMETERS

JEDEC: DDR4-2133 CL15-15-15 @1.2V
XMP Profile #1: DDR4-2800 CL14-16-16 @1.35V
XMP Profile #2: DDR4-2666 CL14-15-15 @1.35V

CL(IDD)-15 cycles
Row Cycle Time (tRCmin)-46.5ns (min. )
Refresh to Active/Refresh-260ns (min. )
Command Time (tRFCmin)
Row Active Time (tRASmin)-33ns (min. )
Maximum Operating Power-TBD W*
UL Rating-94 V - 0
Operating Temperature-0oC to +85oC
Storage Temperature--55o C to +100oC

FEATURES

Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD = 2.25V to 3.6V
On-Die termination (ODT)
16 internal banks; 4 groups of 4 banks each
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
Height 1.36 (34.57mm)

HyperX is a division of Kingston.