Този продукт вече не се предлага от нито един електронен магазин.
Подобни продукти
Описание на продукта
Simple Web management: allows for easy management of the switch- even by nontechnical users- through an intuitive Web GUI; http and secure http (https) is supported Single IP management:...
Параметри на продукта
Параметри на продукта
Описание на продукта
Simple Web management: allows for easy management of the switch- even by nontechnical users- through an intuitive Web GUI; http and secure http (https) is supported
Single IP management: enables management of up to four HP 1910 devices using a single Web interface; simplifies management of multiple devices
Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
SNMPv1, v2c, and v3: facilitates management of the switch, as the device can be discovered and monitored from an SNMP management station
Complete session logging: provides detailed information for problem identification and resolution
Quality of Service (QoS)
Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Rate limiting: sets per-port ingress enforced maximums and per-port, per-queue minimums
Traffic prioritization: provides time-sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p classification; packets are mapped to four hardware queues for more effective throughput
Connectivity
IPv6: IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge. IPv6 routing: supports IPv6 static routes. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding. IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic.
Auto-MDI/MDIX: adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports
IEEE 802.3X flow control: provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node
IEEE 802.3af Power over Ethernet (PoE) ready: provides up to 15.4 W per port to power standards-compliant IP phones, wireless LAN access points, Web cameras, and more (all PoE models)
IEEE 802.3at Power over Ethernet (PoE+): provides up to 30 W per port which allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments. (Note: applies to all PoE models, except the two 24G-PoE models which support a pre-standard implementation of PoE+)
Security
Advanced access control lists (ACLs): enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access
Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
IEEE 802.1X and RADIUS network logins: controls port-based access for authentication and accountability
Automatic VLAN assignment: assigns users automatically to the appropriate VLAN based on their identity, location and time of day
STP BPDU port protection: blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
Performance
Half-/full-duplex auto-negotiating capability on every port: doubles the throughput of every port
Selectable queue configurations: allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications
IGMP snooping: improves network performance through multicast filtering, instead of flooding traffic to all ports
Fiber uplink: provides greater distance connectivity using Gigabit fiber uplinks
Layer 2 switching
VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
Spanning Tree Protocol (STP): supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
BPDU filtering: drops BPDU packets when STP is enabled globally but disabled on a specific port
Jumbo frame support: supports up to 10 kilobyte frame size to improve the performance oflarge data transfers
Layer 3 services
Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
DHCP relay: simplifies management of DHCP addresses in networks with multiple subnets
Latency
100 Mb Latency: < 5 s
1000 Mb Latency: < 5 s
Management features
IMC - Intelligent Management Center
limited command-line interface
Web browser
SNMP Manager
IEEE 802.3 Ethernet MI
48x10/100/1000Base-T
Single IP management: enables management of up to four HP 1910 devices using a single Web interface; simplifies management of multiple devices
Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
SNMPv1, v2c, and v3: facilitates management of the switch, as the device can be discovered and monitored from an SNMP management station
Complete session logging: provides detailed information for problem identification and resolution
Quality of Service (QoS)
Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Rate limiting: sets per-port ingress enforced maximums and per-port, per-queue minimums
Traffic prioritization: provides time-sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p classification; packets are mapped to four hardware queues for more effective throughput
Connectivity
IPv6: IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge. IPv6 routing: supports IPv6 static routes. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding. IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic.
Auto-MDI/MDIX: adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports
IEEE 802.3X flow control: provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node
IEEE 802.3af Power over Ethernet (PoE) ready: provides up to 15.4 W per port to power standards-compliant IP phones, wireless LAN access points, Web cameras, and more (all PoE models)
IEEE 802.3at Power over Ethernet (PoE+): provides up to 30 W per port which allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments. (Note: applies to all PoE models, except the two 24G-PoE models which support a pre-standard implementation of PoE+)
Security
Advanced access control lists (ACLs): enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access
Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
IEEE 802.1X and RADIUS network logins: controls port-based access for authentication and accountability
Automatic VLAN assignment: assigns users automatically to the appropriate VLAN based on their identity, location and time of day
STP BPDU port protection: blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
Performance
Half-/full-duplex auto-negotiating capability on every port: doubles the throughput of every port
Selectable queue configurations: allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications
IGMP snooping: improves network performance through multicast filtering, instead of flooding traffic to all ports
Fiber uplink: provides greater distance connectivity using Gigabit fiber uplinks
Layer 2 switching
VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously
Spanning Tree Protocol (STP): supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
BPDU filtering: drops BPDU packets when STP is enabled globally but disabled on a specific port
Jumbo frame support: supports up to 10 kilobyte frame size to improve the performance oflarge data transfers
Layer 3 services
Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
DHCP relay: simplifies management of DHCP addresses in networks with multiple subnets
Latency
100 Mb Latency: < 5 s
1000 Mb Latency: < 5 s
Management features
IMC - Intelligent Management Center
limited command-line interface
Web browser
SNMP Manager
IEEE 802.3 Ethernet MI
48x10/100/1000Base-T
Липсва или е неправилен важен параметър? Предоставената информация е само за ориентиране, затова ви съветваме да проверите дали предлаганият продукт има ключовите параметри от които се нуждаете, преди да купите от магазина по ваш избор. Въпреки че се стремим към максимална точност на информацията, за съжаление не можем винаги да гарантираме 100% съответствие. Цените на продуктите са с включен ДДС.
Продуктът все още няма отзиви.