Noctua NF-A6X25 PWM
Най-евтини оферти (18)
Описание на продукта
Параметри на продукта
Мнения
, закупен в Йон компютърс
- Почти не се чува
- Скъп
Качествен вентилатор за mini PC
, закупен в Plasico IT Superstore
Отлично качество на продукта. Без забележки.
Параметри на продукта
Описание на продукта
Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A6x25 is a highly optimised, premium quality quiet fan in 60x25mm size. The PWM version sports Noctua’s custom designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise-Adaptor to reduce the maximum speed during PWM control from 3000 to 2300rpm. Its superb running smoothness, SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands.
Size
60x60x25 mm
Connector
4-pin PWM
Bearing
SSO2
Blade Geometry
A-Series with Flow Acceleration Channels
Frame Technology
AAO (Advanced Acoustic Optimisation)
Rotational Speed (+/- 10%)
3000 RPM
Rotational Speed with L. N. A. (+/- 10%)
2300 RPM
Min. Rotational Speed (PWM, +/-20%)
550 RPM
Airflow
29,2 m³/h
Airflow with L. N. A.
22,6 m³/h
Acoustical Noise
19,3 dB(A)
Acoustical Noise with L. N. A.
13,7 dB(A)
Static Pressure
2,18 mm H 2 O
Static Pressure with L. N. A.
1,29 mm H 2 O
Max. Input Power
0,96 W
Max. Input Current
0,08 A
Voltage
12 V
MTBF
> 150.000 h
Scope of Delivery
- Low-Noise Adaptor (L. N. A. )
- 4-Pin Y-Cable
- 30cm Extension Cable
- 4 Vibration-Compensators
- 4 Fan Screws
Warranty
6 years
Details
Flow Acceleration Channels
The NF-A6x25 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.
Reduced Motor Hub Size
Thanks to its streamlined, compact motor design, the NF-A6x25’s motor hub is smaller than with conventional 6cm fans. This allows for more blade surface area and thus contributes to the NF-A6x25’s superior airflow and pressure performance.
AAO Frame
Noctua’s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua’s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan’s performance/noise efficiency.
Stepped Inlet Design
Noctua’s Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space restricted environments.
Inner Surface Microstructures
With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.
Integrated Anti-Vibration Pads
Integrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.
SSO2 Bearing
The NF-A6x25 features the further optimised second generation of Noctua’s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.
Custom designed PWM IC with SCD
Supporting fully automatic PWM speed control, the NF-A6x25 PWM uses Noctua’s custom designed NE-FD1 PWM IC that integrates Smooth Commutation Drive (SCD) technology. By providing smoother torque impulses, SCD suppresses PWM switching noises and thus makes the fan quieter at low speeds.
Low-Noise Adaptor
The NF-A6x25 PWM is supplied with a Low-Noise Adaptor (L. N. A. ) that reduces the maximum fan speed from 3000 to 2300rpm. The L. N. A can be used either to run the fan at a fixed speed of 2300rpm or to cap the maximum speed when using automatic PWM control.
Extensive cabling options
The fan’s short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows to connect a second NF-A6x25 PWM fan to the same PWM fan header for automatic control.
6 years manufacturer’s warranty
Noctua fans are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the NF-A6x25 features an MTBF of more than 150.000 hours rating and comes with a full 6 years manufacturer’s warranty.
Липсва или е неправилен важен параметър? Предоставената информация е само за ориентиране, затова ви съветваме да проверите дали предлаганият продукт има ключовите параметри от които се нуждаете, преди да купите от магазина по ваш избор. Въпреки че се стремим към максимална точност на информацията, за съжаление не можем винаги да гарантираме 100% съответствие. Цените на продуктите са с включен ДДС.
Оценка на продукта
, закупен в Йон компютърс
- Почти не се чува
- Скъп
Качествен вентилатор за mini PC
- Добро качество. Охлажда се много добре. И не е шумно.
- Може да е по-евтино.
Това е отличен продукт.
- По-тих от фабричния вентилатор.
- Конекторът не пасва по подразбиране на конкретната машина, а се нуждае от малко настройки.
Купих машина втора употреба (формат USDT) , вентилаторите бяха малко по-шумни от очакваното, така че търсех по-тихи.
Тих, работи добре. Продава се като преопакован, практически като нов.
, закупен в Plasico IT Superstore
Отлично качество на продукта. Без забележки.
- Допълнителният удължител и Y-кабелът са много удобни за моята Mini itx платка е вентил. Но по този начин мога да го сложа като втори клапан. Имах нужда от него и в моя случай с Sharkoon CA-I VGA ми се изплати.
- цената
Скъпо, но качеството и удобствата си имат цена. Не можах да намеря друг продукт, който да отговаря на моите 6 см.