Описание, детайли - Zalman CNPS7700-AlCu
| Тип | активен охладител |
| Вентилатор за | Процесор |
| Обороти на вентилатора | 2000 об/мин |
| Размери | 136 x 136 x 67 |
| Тегло | 600 г |
Features 1. Does not generate noise or vibration in Silent Mode.
2. Pure Copper and Pure Aluminum base material ensures excellent heat dissipation.
3. Intel Pentium 4 (Socket 775), Intel Pentium 4 (Socket 478), and AMD64 (Socket 754/939/940) compatible design for broad compatibility.
4. The large 120mm fan inside the FHS maximizes cooling performance by providing sufficient airflow even at slow rotation speeds.
5. The large 120mm fan provides air flow over a large area, cooling not only the CPU, but the VGA card, Northbridge, FET, and RAM.
6. The adjustable fan speed controller (FAN MATE 2) enables control of noise and fan performance.
Compatible CPUs SocketCPUSilent Mode
(1,000~1,400rpm)Low-noise Mode
(1,400~2,000rpm)Intel775Pentium 4PrescottUp to 540Supports all speedsCeleron DSupports all speedsSupports all speeds478Celeron DSupports all speedsSupports all speedsPentium 4WillametteNorthwoodPrescottCeleronAMD75 4SempronSupports all speedsSupports all speedsAthlon 64939Athlon 64Athlon 64 FX940Athlon 64 FXOpteron1) Intel Pentium4 Socket 775/478
2) AMD Sempron/AMD64 Socket 754/939/940
* Note : No motherboard components with a heightgreater than 39mm (1.53inch), as well as the PSU, disk drives, VGA card, and RAMshould be present within a 68mm (2.68 inch) radius from the center of the CPU. Specifications CNPS7700-AlCu FANSpeed Controller (FAN MATE 2)
1) Heatsink Assembly (CNPS7700-Cu)
2) Four Grips (2 each for S-Type and L-Type)
3) Four Bolts
4) Thermal Grease
5) Fan Speed Controller (FAN MATE 2)
6) Double-sided Tape (for installing FAN MATE 2)
7) Cable for FAN MATE 2
8) User's Manual - in English and Korean Componentsfor Intel Pentium 4 (Socket 775)
9) One Clip Support for Socket 775
10) One Backplate for Socket 775
11) Four Clip Support Fixing Bolts Componentsfor Intel Pentium 4 (Socket478)
12) Two Clip Supports for Socket 478 Componentsfor AMD Sempron/AMD64 (Socket 754/939/940)
13) Two Nipples
14) One Backplate for AMD64
15) One set of Washers Note 1. Fan should be set to Normal Mode if OVERCLOCKING.
2. Zalman Tech Co. , Ltd. is not responsible for any damage resultingfrom CPU OVERCLOCKING.
3. The maximum weight for a cooler is specified as 450g for Intel Socket775/478 and AMD Socket754/939/940. Special care should be taken when moving a computerequipped with a cooler whichexceeds the relevant weight limit. Zalman Tech is not responsible forany damage that occurswhen moving a computer. Продукт известен още и като CNPS 7700 AlCu, CNPS7700AlCu, CNPS7700 AlCu, CNPS 7700-AlCu
2. Pure Copper and Pure Aluminum base material ensures excellent heat dissipation.
3. Intel Pentium 4 (Socket 775), Intel Pentium 4 (Socket 478), and AMD64 (Socket 754/939/940) compatible design for broad compatibility.
4. The large 120mm fan inside the FHS maximizes cooling performance by providing sufficient airflow even at slow rotation speeds.
5. The large 120mm fan provides air flow over a large area, cooling not only the CPU, but the VGA card, Northbridge, FET, and RAM.
6. The adjustable fan speed controller (FAN MATE 2) enables control of noise and fan performance.
Compatible CPUs SocketCPUSilent Mode
(1,000~1,400rpm)Low-noise Mode
(1,400~2,000rpm)Intel775Pentium 4PrescottUp to 540Supports all speedsCeleron DSupports all speedsSupports all speeds478Celeron DSupports all speedsSupports all speedsPentium 4WillametteNorthwoodPrescottCeleronAMD75 4SempronSupports all speedsSupports all speedsAthlon 64939Athlon 64Athlon 64 FX940Athlon 64 FXOpteron1) Intel Pentium4 Socket 775/478
2) AMD Sempron/AMD64 Socket 754/939/940
* Note : No motherboard components with a heightgreater than 39mm (1.53inch), as well as the PSU, disk drives, VGA card, and RAMshould be present within a 68mm (2.68 inch) radius from the center of the CPU. Specifications CNPS7700-AlCu FANSpeed Controller (FAN MATE 2)
- Dimensions: 136(L) x 136(W) x 67(H)mm
- Weight: 600g
- Base Material: Pure Aluminum & Pure Copper
- Dissipation Area : 3,268 cm2
- Bearing Type: 2-Ball
- Speed: 1,000 ~ 2,000rpm 10%
- Thermal Resistance: 0.21 ~ 0.28C/W
- Noise Level: 20 ~ 32dB 10%
- Dimensions: 70(L) x 26(W) x 26(H)mm
- Weight: 20g
- Output Voltage: 5V ~ 11V 2%
- Allowable Power: 6W or lower
- Connector: 3-Pin
1) Heatsink Assembly (CNPS7700-Cu)
2) Four Grips (2 each for S-Type and L-Type)
3) Four Bolts
4) Thermal Grease
5) Fan Speed Controller (FAN MATE 2)
6) Double-sided Tape (for installing FAN MATE 2)
7) Cable for FAN MATE 2
8) User's Manual - in English and Korean Componentsfor Intel Pentium 4 (Socket 775)
9) One Clip Support for Socket 775
10) One Backplate for Socket 775
11) Four Clip Support Fixing Bolts Componentsfor Intel Pentium 4 (Socket478)
12) Two Clip Supports for Socket 478 Componentsfor AMD Sempron/AMD64 (Socket 754/939/940)
13) Two Nipples
14) One Backplate for AMD64
15) One set of Washers Note 1. Fan should be set to Normal Mode if OVERCLOCKING.
2. Zalman Tech Co. , Ltd. is not responsible for any damage resultingfrom CPU OVERCLOCKING.
3. The maximum weight for a cooler is specified as 450g for Intel Socket775/478 and AMD Socket754/939/940. Special care should be taken when moving a computerequipped with a cooler whichexceeds the relevant weight limit. Zalman Tech is not responsible forany damage that occurswhen moving a computer. Продукт известен още и като CNPS 7700 AlCu, CNPS7700AlCu, CNPS7700 AlCu, CNPS 7700-AlCu