Zalman Fatal1ty FS-C77

CPU Compatibility

Intel Socket 775 Pentium 4 Prescott, Celeron D, Socket 478 Celeron, Celeron D, Pentium 4 Willamette, Northwood, Prescott

AMDSocket 754 Sempron, Athlon 64, Socket 939 Athlon 64, Athlon 64 FX, Socket 940 Athlon 64 FX, Opteron

1) Intel Pentium 4 Socket 775/478
2) AMD Sempron/AMD64 Socket 754/939/940
* Note : No motherboard components with a height greater than 39mm (1.53inch), as well as thePSU, disk drives, VGA card, and RAM should be present within a 68mm (2.68 inch)radius from the center of the CPU.

Specifications

• Dimensions: 136(L) x 136(W) x 67(H)mm
• Weight: 918g (Fan included)
• Base Material: Pure Copper
• Dissipation Area : 3,268 cm2
• Bearing Type: 2 Ball-Bearing Sets
• Speed: 2,400rpm 10%
• Thermal Resistance: 0.17C/W
• Noise Level: 42.5dB 10%

Features

1. Intel Pentium 4 (Socket 775/478), AMD Sempron / AMD64 (Socket 754/939/940) compatible design for broad compatibility.
2. 120mm fan (with red LEDs) mounted in the heatsink for maximum cooling efficiency.
3. Wide reach of air flow simultaneously cools the VGA card, Northbridge, FET, and RAM.
4. Pure Copper base material ensures excellent heat dissipation.

Components

Common Components

1) Heatsink Assembly (FS-C77)
2) Four Grips (2 each for S-Type and L-Type)
3) Four Bolts
4) Thermal Grease
5) User's ManualComponents for Intel Pentium 4 (Socket 775)

6) One Clip Support for Socket 775
7) One Backplate for Socket 775
8) Four Clip Support Fixing BoltsComponents for Intel Pentium 4 (Socket 478)

9) Two Clip Supports for Socket 478Components for AMD Sempron/AMD64 (Socket 754/939/940)

10) Two Nipples
11) One Backplate for AMD64
12) One set of Washers

Note

1. The maximum weight for a cooler is specified as 450g for Intel Socket 775/478 and AMD Socket754/939/940. Special care should be taken when moving a computer equipped with a cooler which exceeds therelevant weight limit. Zalman Tech is not responsible for any damage that occurs when moving a computer.

2. Zalman Tech Co. , Ltd. is not responsible for any damage resulting from CPU OVERCLOCKING.

3. Zalman Tech Co. , Ltd. , Fatal1ty, Inc. and any of its partners are notresponsible for any damages due to external causes, including but not limited to, improper use, problems with electricalpower, accident, neglect, alteration, repair, improper installation, or improper testing.