Fujifilm SQ10 (16552550/16556867)

 

Shoot to thrill. Instant beautiful fun , at your command.

Express your creativity in an instant, with stunning direct prints from the new hybrid instax SQUARE SQ10. This camera lets you capture those 'once in a lifetime' memories and moments beautifully, in a stylish square format.

And because it's a hybrid, you get the best of both worlds – the control and composition of a digital camera, with the enjoyment and tangible fun of a real photo print. What will you capture first?

 

 

 

 

SQUARE FORMAT

Square photos are enjoying retro look and the perfection of 1:1 aspect that adds sophostication to every photo, no matter what the composition. Enjoy a wider range of uses and forms of expression.

Actual size Full film size: 86 x 72mm 

Screen size: 62 x 62mm

 

 

 

 

HYBRID INSTAX CAMERA

• Photos you've taken can be printed any time, as many times as you want - whatever works for you!


• Save your photos to the internal memory or storage media so that you can view them whenever you want, then print your favorites.


• Have fun with image effects (filters, vignettes, brightness adjustment) before or after printing.


• Comes with a TFT color LCD monitor so you can edit and process images to create just the look you want. The split display allows you to view images and print them as displayed on the screen.


• You can also save other images to storage media (microSD card), edit and print from SQ10.


• In addition to reprints, you can find images from the print history and print them again

 

 

 

 

 

Left and right double shutter buttons with AE/AF lock

Center lens allows easy shooting from any angle for accurate recreation of the composition of your shot.

 

Command dial buttons allows a linear series of operations

Use the command dial to perform all operations from editing and processing to printing while looking at the monitor, so that your photos come out just the way you want them.

 

 

 

 

 

Specifications

Camera

Image sensor

1/4-in. , CMOS with primary color filter

Effective pixels

1920 x 1920

Storage media

Built-in memory, microSD/microSDHC memory card

Recording capacity

Built-in memory: Approx. 50 files 

microSD/microSDHC memory card: Approx. 1000 files per 1 gigabyte

File system

Compliant with Design Rule for Camera File System (DCF), Exif Ver. 2.3, Compliant with JPEG and PIM

Focal length

Fixed as 28.5 mm (35-mm format equivalent)

Aperture

F2.4

Auto focus system

Single AF (Contrast-detect TTL, equipped with AF illuminator)

Focus range

10cm to ∞

Shutter speed

1/29500 sec. to 1/2 sec. (Auto), maximum 10 sec. in Bulb mode

Sensitivity

ISO 100 to 1600 (Auto)

Exposure control

Programmed AE

Metering

256-segment through the lens (TTL) metering, Multi metering

White balance

Auto

Flash

Auto/Compulsory flash/Suppressed flash/Slow synchro/Red-eye removal Effective range: Approx. 50 cm to 8 m

Shooting mode

Standard, Double exposure, Bulb mode

Self-timer

Approx. 10 sec. /Approx. 2 sec.

Image effect

Partial color (Red / Orange / Yellow / Green / Blue / Purple), 10 Filters, Brightness adjustment, Vignette

Playback function

Trimming, Multi image playback

 

Printer

Film

FUJIFILM Instant Film instax SQUARE (Purchased separately)

Photo capacity

10 prints/pack

Film size

86 mm x 72 mm

Image size

62 mm x 62 mm

Supported image size

800 x 800 dots

Printing solution

12.5 dots/mm (318 dpi, 80 μm dot pitch)

Printing levels

256 levels per color (RGB)

Supported image format

JPEG (Some images saved with a photo editing/processing software may not be displayed or printed. )

Printing time

Approx. 12 seconds

Print timing

Printing shortly after shooting/Printing after selecting image

Printing function

Images on built-in memory/micro SD card

Reprint

Printable up to the past 50 prints 

(Up to 50 images stored in print history)

Digital zoom

Up to 2.4 X in printing (Output pixels: 800 x 800)

Film detection

Yes (Automatic ejection when inserted)

 

Others

LCD monitor

3.0-in. (7.6 cm) TFT color LCD monitor 

Pixels: Approx. 460k-dots

Input/Output terminals

Micro USB (For charging only)

Battery

NP-50

Charging function

Built-in

Printing capacity

Approx. 160 prints (From when the battery is charged fully) 

* Varies depending on the conditions of use.

Charging time

Approx. 3 to 4 hours (Using 0.5 A USB port) 

* Varies depending on air temperature.

Dimension

119 mm x 47 mm x 127 mm (W x D x H)

Weight

450 g (includes fi lm pack and battery)