ARCTIC P12 PWM PST (ACFAN00132A)

P12 PWM PST

Pressure-Optimised 120 mm Fan with PWM PST +

 

Optimised for Static Pressure

During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM PST is particularly suitable for use on heatsinks and radiators.

 

0 dB Mode — Zero rpm

The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.

 

More Efficient Technology

The motor is powered by a PWM IC of the newest generation, which allows the new P12 PWM PST to run much more efficiently than its predecessors. This saves energy without compromising the performance.

 

Maximum Quietness, Minimum Vibration

Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from the commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

 

Specs:

General Data

Performance

Fan Speed:

200—1800 rpm (0 rpm below 5 % PWM)

Airflow:

56.3 cfm | 95.7 m³/h

Static Pressure:

2.20 mmH 2 O

Noise Level:

0.3 Sone

Operating Ambient Temperature:

0—40 °C

Fan

Fan Frame:

Standard

Control Type:

PWM PST

Connector:

4-Pin Connector + 4-Pin Socket

Fan Bearing:

Fluid Dynamic Bearing

Electric Characteristics:

Typical Voltage:

12 V DC

Starting Voltage:

3.9 V

Current | Voltage:

0.1 A | 12 V DC

Cable Length:

400 mm

Size & Weight

Length:

120 mm

Width:

120 mm

Height:

25 mm

Weight:

145 g