AXAGON PCEM2-DC

AXAGON PCEM2-DC PCI-E 3.0 4x - DUAL M. 2 SSD (NVMe + SATA)

Вътрешният адаптер AXAGON PCEM2-D позволява свързването на два SSD M. 2 диска, което го прави идеален избор, когато няма наличен M. 2 слот. Адаптерът поддържа използването както на SATA моноблокови SSD дискове, така и на двете версии SATA и NVMe (PCI-Express) M. 2. Адаптерът не ограничава капацитета на SSD диска и могат да се използват всякакви SSD дискове/адаптери/M. 2 устройства с дължина до 110 мм. Поддържа се едновременна работа и на двата диска.

Благодарение на 4-лентовия PCI-Express 3.0 интерфейс, съвместим с x4, x8 и x16 слотове, може да бъде достигната скорост до 8 GBps. В сравнение със стандартните SATA SSD дискове, скоростта на трансфер на NVMe SSD е няколко пъти по-висока. Висококачественият дизайн на адаптера, включително медните отвори, спомага за по-доброто разсейване на топлината, генерирана по време на работа на SSD M. 2. Двойните сини светодиоди показват или стартиране, или прехвърляне на данни в M. 2 слота.

he internal AXAGON PCEM2-DC adapter allows to connect up to two M. 2 SSDs to a desktop. So, it is an ideal choice for upgrading a desktop that has no M. 2 slot.

The adapter supports the use of both one-sided and double-sided SATA and NVMe (PCI Express) M. 2 SSDs. The reduction does not limit SSD capacity, and any M. 2 cards with a length up to 110 mm can be used. The simultaneous operation of both disks is commonplace.

Thanks to PCI-Express 3.0 4-lane interface compatible with x4, x8 and x16 slots, a speed as high as 8GBps can be achieved. When compared to standard SATA SSDs, bit rates of NVMe SSDs are many times higher.

The high quality card design, including copper-plated vents, assists in a better dissipation of heat generated during the M. 2 SSDs operation. A metal cover with fan and an attached passive cooler, incl. thermal pads, assist in M. 2 SSDs cooling. It results in an ideal combination of passive and active cooling of M. 2 SSDs and heat removal. Thanks to the cooling and temperature reduction by up to 35°C, it is possible to use the maximum power of deployed SSDs.

Double blue LEDs indicate either power on or data transfer in the M. 2 slot. The package also contains a low profile blanking plug for mounting the adapter into low profile cases.

Input:
PCI-Express 3.0 interface compatible with PCI-Express 1.0a / 1.1 / 2.0 / 2.1.
Number of 4-Lane lines, compatible with x4 / x8 / x16 PCIe slots.
Bandwidth of 4-Lane PCI-Express 3.0 bus of up to 8 GB/s (two-way).
SATA connector to connect the motherboard when a SATA M. 2 SSD is used.
To achieve the best possible bit rates, the use of a SATA 6G controller is recommended.

Output:
NGFF 75-pin M-key slot to install the NVMe (PCI-Express) M. 2 SSDs.
NGFF 75-pin B-key slot to install the SATA (AHCI) M. 2 SSDs.

Other features:
Full Plug and Play support.
Support of M. 2 disks of any size - 2230, 2242, 2260, 2280, 22110 mm.
Support of M. 2 disks of any capacity.
Simultaneous operation of both disks.
Support of both one-sided and double-sided M. 2 disks.
A better dissipation of heat from M. 2 SSDs thanks to copper-plated vents.
A metal cover with fan supplied from the card.
An auxiliary fin cooler to provide a superior cooling option for M. 2 SSD.
Support of booting from SSD card.
No drivers need to be installed.
Card dimensions: 140 x 68 x 17 mm, weight 111 g.
Note: CAUTION! The adapter allows to insert B+M-key disks in both M. 2 slots. It is important to check the disk parameters, i. e. to make sure whether the disk is designed for SATA or NVMe (PCI-Express) interface, and to connect it to the right slot. SATA SSDs are connected to B-key slot, NVMe SSDs are connected to M-key slot.

Power supply:
The adapter is directly supplied from PCI-Express bus; no external power supply is needed.
The system of dual power supply ensures a sufficient power for connected M. 2 SSDs.
In addition, the system of redundant power supply reduces the adapter thermal load.