Delock 64138

This docking station by Delock enables the installation of an M. 2 NVMe and an M. 2 SATA SSD as well as an SD Express memory card and it can be connected via USB to the PC, laptop, tablet or smart phone.

SD Express slot
The SD Express slot allows to read and write SD Express memory cards. SD, SDHC and SDXC memory cards with UHS-I and UHS-II can also be used.

Simultaneous using of all ports
All three memories can be used simultaneously.

Clone Function without PC
The built-in clone function allows to clone memory without using a PC. It is possible to clone from NVMe to SATA, SD to NVMe, SD to SATA and SATA to NVMe.

Ideal test equipment
The memory is simply plugged into the robust housing and can be used immediately. No screws, tools or accessories are required, which means that the SSD can be changed quickly.

Power supply included
The power supply, which is included, will be connected to the USB-C power connector and thus supplies the docking station and all connected memories with power.

• Connectors:
  1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C female
  2 x 67 pin M. 2 key M slot
  1 x SD Express slot
  1 x USB Type-C female (power supply)
• Chipset: JMicron JMS581
• Supports M. 2 modules with key M or key B+M based on PCIe (NVMe)
• Supports M. 2 modules with key B+M based on SATA
• Supports NVM Express (NVMe)
• Supports S. M. A. R. T.
• Supports TRIM
• Supports DevSleep
• Supports Native Command Queuing (NCQ)
• Data transfer rate up to 10 Gbps
• Supports SD 3.0 (UHS-I), SD 4.0 (UHS-II), SD 5.1 (UHS-II V90), SD 7.1
• Supports UASP
• LED indicator for power, access and copy status
• Bootable
• Function key:
  1 x Clone button
  1 x On / Off switch
  1 x DIP switch for clone mode
• Dimensions (LxWxH): ca. 76 x 79 x 18 mm
• Hot Plug, Plug & Play

Power supply specification

• Wall power supply
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.6 A
• Output: 5.0 V / 3.0 A

System requirements

• Android 10.0 or above
• Chrome OS 90.0 or above
• iPad Air (4th Generation) or above
• Linux Kernel 5.8 or above
• Mac OS 11.2. 3 or above
• Surface Pro 7
• Windows 8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port or
• Device with a free USB Type-C port or with a free Thunderbolt 3 port

Tech specs:

General

Func tion

bootable
Clone Function
 

Supported operating system

Linux Kernel 5.8. 0 or above
Surface Pro 7
Windows 10 32-Bit
Windows 10 64-Bit
Windows 8.1 32-Bit
Windows 8.1 64-Bit
Android 10.0 or above
iPad Air (4th Generation) or above
Mac OS 11.2. 3 or above
Chrome OS 90.0 or above
 

LED indicator

power, access and copy status
 

Slot

PCIe
SATA
 

Maximum height of the components on the module

1.5 mm application of double-sided assembled modules supported
 

Interface

Connector 1

1 x USB 10 Gbps USB Type-C female

Connector 2

2 x 67 pin M. 2 key M slot
connector 3

1 x USB Type-C female (power supply)

connector 4

1 x SD Express slot
 

Technical characteristics

Data transfer rate

10 Gbps

Вижте от къде можете да закупите продукта:

В наличност • Един вариантБезплатно98 % • 308 мненияДанни на магазина

Докинг станция Delock 1 x M. 2 NVMe SSD, 1 x M. 2 SATA SSD, SD Express Card Reader, Клониране (64138)

182,34 €
356,63 лв.*

към магазина

Докинг станция Delock 1 x M. 2 NVMe SSD, 1 x M. 2 SATA SSD, SD Express Card Reader, Клониране (64138)

В наличност • Един вариант99 % • 5858 мненияДанни на магазина

Докинг станция Delock 1 x M. 2 NVMe SSD, 1 x M. 2 SATA SSD, SD Express Card Reader, Клониране (DELOCK-64138)

173,83 €
339,98 лв.*

към магазина

Докинг станция Delock 1 x M. 2 NVMe SSD, 1 x M. 2 SATA SSD, SD Express Card Reader, Клониране (DELOCK-64138)

В наличност • Един вариантБезплатно98 % • 8118 мненияДанни на магазина

Докинг станция Delock 1 x M. 2 NVMe SSD, 1 x M. 2 SATA SSD, SD Express Card Reader, Клониране (DELOCK-64138)

175,00 €
342,27 лв.*

към магазина

Докинг станция Delock 1 x M. 2 NVMe SSD, 1 x M. 2 SATA SSD, SD Express Card Reader, Клониране (DELOCK-64138)