JONSBO N1 ITX GEJB-081
Препоръчани оферти (3)
JONSBO N1 ITX GEJB-081
Най-евтини оферти (3)
JONSBO N1 ITX GEJB-081
Описание на продукта
Параметри на продукта
Параметри на продукта
Описание на продукта
- Graphics cards up to a maximum length of 185 mm
- Power supply via SFX power supply
- CPU cooler up to 70mm height
- A 140mm fan pre-installed in the front
- Hard drive cage for 1x 2.5 SSD and 5x 3.5 HDDs
- I/O panel: 1x USB-C, 1x USB 3.0 Type A, 1x 3.5 mm jack plug (Audio + Mic)
The Jonsbo N1 Mini-ITX case in detail
A small computer for cloud storage or home office systems. The Jonsbo N1 is the small but fine solution for functional systems. It accommodates a 2.5-inch SSD and five 3.5-inch HDDs. It is changeable and space-saving, because it can be laid down or placed upright.
Organization and Hardware
The Jonsbo N1 is a Mini-ITX case and only compatible for these Formactor motherboard sizes. Only small 1-slot graphics cards with a length of 185mm fit inside. The housing can be completely removed to facilitate installation. Important! There is not much space in the interior. Graphics cards only fit in with low-profile brackets. It is advisable to buy a CPU chipset with a graphics unit.
The power supply of the mini system is ensured by a power supply in the compact SFX standard. The CPU cooler, on the other hand, must be a maximum of 70 mm high. For air circulation, a 140mm fan is permanently installed in the front and of course included in the scope of delivery.
Compact design for home use
If you are looking for a small computer for small basic tasks such as office programs or want to back up in your own cloud storage on site, the Jonsbo N1 is a practical solution. The design is space-saving, clever and offers capacity five 3.5-inch HDDs in a hard drive cage. A 2.5-inch data carrier can be mounted above the power supply.
The functionality of the Jonsbo N1 is very important. Its delicate dimensions of 170 mm x 217 mm x 354 mm (W x H x D) fit into any home and blend quietly into any setup or look in their high-quality aluminum housing. If you still can't find a good place where to put it, put it up. No matter how, the I/O panel with a USB-C, USB 3.0 Type A or Audio 3.5 mm jack plug remains freely accessible in any position .
Specifications:
- Dimensions: 170mm x 217mm x 354mm (W x H x D)
- Materials: aluminum, steel
- Weight: 3.8kg
-Colour: Grey
- Form factor motherboard: Mini-ITX
- Fan (preinstalled):
- Front: 140mm
Drive bays:
- 1 x 2.5 inch
- 5x 3.5 inches
- Power supply: SFX, max. 150mm
- Graphics card: max. 185 mm length (low profile)
- Expansion slots: 1 (single slot, low profile)
I/O panel:
- 1x USB 3.0 (Type A, USB 3.2 Gen 1, max. 5 Gbit/s)
- 1x USB 3.0 (Type C, USB 3.2 Gen 1, max. 5 Gbit/s)
- 1x 3.5 mm jack plug (mic and headphones)
- 1x power switch
Вижте от къде можете да закупите продукта:
Липсва или е неправилен важен параметър? Предоставената информация е само за ориентиране, затова ви съветваме да проверите дали предлаганият продукт има ключовите параметри от които се нуждаете, преди да купите от магазина по ваш избор. Въпреки че се стремим към максимална точност на информацията, за съжаление не можем винаги да гарантираме 100% съответствие. Цените на продуктите са с включен ДДС.
Продуктът все още няма отзиви.