RPM Носачи задни Арма Rear A-arms for the ARRMA Kraton Notorious Outcast Talion 6S (V5 & EXB) line of Vehicles RPM81722 (RPM81722)

Носачи задни Арма Rear A-arms for the ARRMA Kraton Notorious Outcast Talion 6S (V5 & EXB) line of Vehicles RPM81722

Quick Notes:
- stock replacement a-arms for V5 / EXB models (see Version Notes below)
- extra shock mount hole for added suspension versatility
- fits most 6S version models (see Version Notes below)
- sold as one left rear and one right rear A-arm in each package

RPM   Rear A-arms for 6S V5 / EXB editions of the ARRMA Kraton, Notorious, Talion, Fireteam & Outcast are an all new design. The design modifications accommodate changes made by ARRMA for V5 and EXB versions of these vehicles, although they are reverse compatible for older models (see Version Notes).

Our A-arms are significantly beefier than our original 6S version A-arms. Support beams are 30% thicker, improving durability and strength while reducing flex. Less flex equates to more predictable suspension performance and handling. We also added a second shock mount hole further outboard. This additional position provides a lower profile suspension set-up. The shocks lay down a little further, dropping the ride height for a lower center of gravity. A lower center of gravity equates to higher corner speeds.

RPM   A-arms are molded from our nearly indestructible blend of engineering grade nylons for performance you can rely on when the conditions are at their worst!

Tech Notes:   RPM   ARRMA Kraton, Talion, Notorious, Fireteam & Outcast A-arms are sold as a pair (1 - left & 1 - right) in each package. Our A-arms replace ARRMA #ARA330654.

Version Notes:
V5 & EXB models:   Stock replacement A-arms for ARRMA #ARA330654. Inner shock mount and inner sway bar holes are stock geometry. Do not use outer shock mount and outer sway bar holes for V5 / EXB models.
V4 and earlier models:   Stock replacement A-arms for ARRMA #AR330249. Outer shock mount and outer sway bar holes are stock geometry. Do not use inner shock mount and inner sway bar holes for V4 or older models unless converting to V5 / EXB suspension components.