Thermaltake Toughpower TF3 1550W 80 PLUS Titanium (PS-TPD-1550FNFATE-3)

 

Thermaltake Toughpower TF3 1550W

 

 

 

ATX 3.0 & PICe 12V-2x6 Ready

Unlocking the Power of the Future

 

 

 

 

Toughpower TF3 1550W

Designed for overclockers, user’s with high-end system demands, and more, the Toughpower TF3 Titanium 1550W delivers 80 PLUS Titanium efficiency to satisfy their needs. Built for next-gen hardware, the Toughpower TF3 1550W is compatible with Intel ATX 3.0 specifications and comes with two native 12V-2x6 connectors.

 

 

 

 

 

 

PCIe 12V-2x6 Ready

Toughpower TF3 1550W comes with two native PCIe 12V-2X6 connectors to offer powerful and stable performance allowing the PSU to natively run next-generation GPUs.  

The wattage marked on the PCIe 12V-2X6’s connector is the recommended wattage. (Ref. Intel design guideline) The native PCIe 12+4pin (12V-2X6) connector of the TF3 1550W can deliver up to 600W for graphics cards.

 

 

 

 

 

 

Made to Comply with the Latest Graphics Cards

As the power consumption of graphics cards increase, so has their demand for power. The TF3 1550W is designed to support NVIDIA and AMD graphics cards, it supports 8-pin PCIe cables for AMD graphics cards & RTX 40 series graphics cards, it also comes with 2 x PCIe 12V-2X6 connectors for RTX 40 series cards that need a PCIe Gen 5.0 connector, ready to supply the graphics cards according to their different ways of connections.

 

 

 

 

 

80 PLUS Titanium Certified

80 PLUS Titanium certification means the Toughpower TF3 converts power efficiently, saves energy through its high efficiency up to 94%, resulting in lower power loss and heat buildup inside the power supply.

 

 

 

 

Specs:

Watts 1550WModel TTP-1550AH3FCT-AMax. Output Capacity 1550WDimension ( W / H / D ) 150mm(W)x86mm(H)x180mm(D)PFC (Power Factor Correction) Active PFCPower Good Signal 100-500 msecHold Up Time > 17msecInput Current 15.0AInput Frequency Range 50Hz - 60HzInput Voltage 100-240V~Operating Temperature 0°C to + 50°COperating Humidity 20% to 90%, non-condensingStorage Temperature -20°C to + 70°CStorage Humidity 5% to 95%, non-condensingCooling System 14cm PWM fanEfficiency Meet 80 PLUS Titanium at 115Vac input. MTBF 100,000 hrs minimumPCI-E 6+2pin 9PCIe 12+4pin 2Input current 15.0AProtection OCP/OVP/UVP/OPP/OTP/SCP