Transcend MTE300S 1TB M.2 (TS1TMTE300S)

Transcend MTE300S

 

Ready for the Best

Featuring the M. 2 standard (30mm), a fast PCIe Gen3x4 interface, up to 2,000 MB/s read and 1,100MB/s write speeds, Transcend’s MTE300S SSD is more advanced and efficient than a SATA SSD. The MTE300S delivers higher speeds without sacrificing power to your ultra-thin devices.

Optimized for Small, Thin Devices

At just 30mm in length, the MTE300S SSD is ideal for Ultrabooks, lightweight notebooks, tablets, and handheld gaming PCs. Thinner and lighter than normal hard drives, the MTE300S SSD gives your computer a much-needed boost while saving space!

Be Bold, Save More.

Built with high-quality 3D NAND flash, the MTE300S SSD unleashes up to 512GB of capacity for your computer, adding more storage space and enhancing computing efficiency.

Dimensions

• Single-sided 30.0 mm x 22.0 mm x 2.23 mm

Weight

• 4 g

Type

• 
  M. 2 2230
  

Interface

Bus Interface

• NVMe PCIe Gen3 x4

Storage

Flash Type

• 3D NAND flash

Capacity

• 1000 GB

Operating Environment

Operating Temperature

• 0°C ~ 70°C

Operating Voltage

• 3.3V±5%

Performance

Sequential Read/Write (CrystalDiskMark)
up to 2,000/1,650 MB/s

4K Random Read/Write (IOmeter)
up to 120,000/280,000 IOPS

Terabytes Written (TBW)
400TBW

Mean Time Between Failures (MTBF)

• 2,000, 000 hour(s)

Drive Writes Per Day (DWPD)

• 0.21 (5 yrs)

Note

• Speed may vary due to host hardware, software, usage, and storage capacity.


• The workload used to rate DWPD may be different from your actual workload, which may vary due to host hardware, software, usage, and storage capacity.


• Terabytes Written (TBW) expresses the endurance under the highest capacity.


• Some motherboards only provide PCIe x2 connections for the M. 2 slot, creating a bottleneck on even the fastest drives.

System Requirement

Operating System

• Microsoft Windows 7 or later


• Linux Kernel 2.6. 31 or later

Note

• Systems for use with the PCIe M. 2 SSD must have an M. 2 connector with only an M key. B-key connectors are not compatible. Improper insertion may lead to damage.