PLANET WNAP-6335

Planet WNAP-6335

Faster Speed and Longer Distance
Adopting IEEE 802.11n advanced MIMO technology, it provides high speed, reliable wireless network coverage, and incredible improvement in the wireless performance. As an IEEE 802.11b/g/n compliant wireless device, the WNAP-6335 is able to give stable and efficient wireless performance for long distance application, and with IEEE 802.11n standard and 2T2R MIMO technology, the WNAP-6335 can deliver data rate up to 300Mbps, six times faster than that of the normal 802.11g wireless device. With its adjustable output power up to 500mW and RP-SMA antenna connectors, it can directly connect with various high gain antennas to extend higher coverage for outdoor long-ranging application.

Designed for Various Requirements of Wireless LAN
The WNAP-6335 supports multiple wireless communication connectivities, including AP/Router, WDS PtP, WDS PtMP and WISP modes, that meet various application requirements to enable users to gain more comprehensive experience. It also helps users to easily build wireless network and extend the wireless range of the existing wireless network.

Hardware
Standard Support IEEE 802.11b/g/n
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
Memory 64 Mbytes DDR SDRAM
16 Mbytes Flash
PoE Passive PoE
Interface Wireless IEEE802.11b/g/n, 2T2R
PoE LAN (LAN 1): 1 x 10/100BASE-TX, auto-MDI/MDIX, passive PoE
LAN 2: 1 x 10/100BASE-TX, auto-MDI/MDIX, passive PoE pass-through
Antenna Built-in RP-SMA antenna connectors

Wireless RF Specifications
Wireless Technology
IEEE 802.11b/g
IEEE 802.11n
Data Rate IEEE 802.11b: 1, 2, 5.5, 11Mbps
IEEE 802.11g: up to 54Mbps
IEEE 802.11n (20MHz): up to 150Mbps
IEEE 802.11n (40MHz): up to 300Mbps
Media Access Control CSMA/CA
Modulation Transmission/Emission type: OFDM
Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band 2.412GHz ~ 2.484GHz
Operating Channel America/ FCC: 2.414~2.462GHz (11 Channels)
Europe/ ETSI: 2.412~2.472GHz (13 Channels)
Japan/ TELEC: 2.412~2.484GHz (14 Channels)
RF Output Power (Max. ) IEEE 802.11b: up to 26 ± 1dBm
IEEE 802.11g: up to 23 ± 1dBm
IEEE 802.11n: up to 22 ± 1dBm
Receiver Sensitivity(dBm) IEEE 802.11b: -94dBm
IEEE 802.11g: -91dBm
IEEE 802.11n: -89dBm
Output Power Control 12~27dBm

Software Features
LAN Built-in DHCP server supporting static IP address distribution
Supports 802.1d STP (Spanning Tree)
WAN ■ Static IP
■ Dynamic IP
■ PPPoE
Operating Mode ■ Bridge
■ WISP
Firewall NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting virtual server and DMZ
Built-in firewall with port/ IP address/ MAC/ URL filtering
Wireless Mode ■ AP/ Router
■ Client
■ WDS PTP
■ WDS PTMP
■ WISP
Channel Width 20MHz / 40MHz
Wireless Isolation Enable to isolate each connected wireless client to let them cannot access mutually
Encryption Type 64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1x
Wireless Security Wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering
Enable/Disable SSID Broadcast
Max. Wireless Clients 25
Max. WDS APs 8
Max. Wired Clients 60
WMM Supports Wi-Fi multimedia
QoS Supports Quality of Service for bandwidth control
NTP Network Time Management
Self Healing Supports Schedule Reboot
Management Web UI, DHCP Client, Configuration Backup and Restore, Dynamic DNS, and SNMP
Diagnostic Tool System Log, Ping Watchdog

Mechanical and Power
IP Level IP55
Material Outdoor UV Stabilized Enclosure
Dimensions (W x D x H) 127 x 63 x 254 mm
Weight 366g
Installation Pole mounting or wall mounting
Power Requirements LAN1
■ 24V DC, 1A/ Passive PoE
■ Pin 4,5 V DC+
■ Pin 7,8 V DC-
■ Pin 3 Reset
Power Consumption 12W

Environment and Certification
Operating Temperature -20~70°C
Operating Humidity 10~95% non-condensing
Regulatory CE, FCC, RoHS