NETGEAR FS116PEU

Affordable Power over Ethernet Switching
The ProSafe FS116P provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The sixteen Fast Ethernet ports can be used for any 10/100 Mbps link and eight of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the ProSafe FS116P automatically determines PoE requirements, speed, duplex, and cable type using AutoUplink. The affordably priced ProSafe FS116P delivers PoE to any small business network that wants to simplify the installation of wireless access points and IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. PoE eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access and lowers installation costs. Compact and flexible, the ProSafe FS116P is ideal for small business network that want to inexpensively use PoE to deploy wireless access points and IP-based network surveillance cameras.

Flexible
Choose to plug in up to 16 Ethernet or Fast Ethernet devices and mix in up to eight 802.3af IP-based devices like wireless access points or IP-based network surveillance cameras. Place these 802.3af-compliant devices where they belong - high up on walls and ceiling for maximum coverage - or anywhere else you need them. Power and data are carried over standard Cat-5 cabling.

Plug and Play
The standards-based ProSafe FS116P senses and adjusts for network speed and cabling type automatically, for easy integration into your existing 10/100 Ethernet network. For PoE, the switch automatically detects 802.3afcompliant devices, and supplies power as needed. Front panel LEDs keep you informed of switch and PoE status.

Quiet and Compact
Engineered for compact convenience, it is only 1-inch high and 4-inches deep, with a durable metal case that is easily positioned on your desktop or a wall, using the included mounting hardware. The fan-less design quietly integrates in your small office environment.

Great Value
With data switching and Power over Ethernet integrated into one unit, the FS116P saves space, reduces cables and eliminates the requirement for dedicated electrical outlets - lowering installation costs, simplifying installation of PoE-capable devices, and eliminating the need for electricians or extension cords. All in all a great benefit for a modest price.
back to top Network Ports
16 x 10/100 Mbps auto speed-sensing UTP ports

Standards Compliance
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x Flow Control
IEEE 802.3af DTE Power via MDI

Performance Specifications
Forwarding modes: Store-and-forward
Bandwidth: 3.2 Gbps
Network latency: Less than 20 s for 64-byte frames in store-and-forward
Buffer memory: 96 KB embedded memory per unit
Address database size:1,000 media access control (MAC) addresses per system
Addressing: 48-bit MAC address
Mean Time Between Failure (MTBF): 116,009 hours (~ 13 years)
Acoustic Noise: 0 dB

Environmental Specifications
Operating temperature: 32 to 104°F (0 to 40° C)
Storage temperature: 14 to 158°F (-10 to 70°C)
Operating humidity: 90% maximum relative humidity, non-condensing
Storage humidity: 95% maximum relative humidity, non-condensing
Operating altitude: 10,000 ft (3,000 m) maximum
Storage altitude: 10,000 ft (3,000 m) maximum

Safety Agency Approvals
CE mark, commercial
CE/LVD EN60950

Status LEDs
System: Power, PoE Maximum Power
Per Port: Link, Activity, Speed, PoE Active, PoE Fault

Electromagnetic Emissions
CE mark, commercial
FCC Part 15 Class B
VCCI Class B
EN 55022 (CISPR 22), Class B
C-Tick

Power Supply
Total Power Consumption: 72W maximum
Total PoE Power Budget: 55W maximum
802.3af power consumption: 55W maximum (ports 1 – 8)
48V DC; 1.45A (70W max); plug is localized to country of sale

Physical Specifications
Dimensions (W x D x H): 11.3 x 4.1 x 1.1 in. (287 x 103 x 27 mm)
Weight: 0.9 kg (2.0 lb)

Warranty
Switch: NETGEAR Lifetime Warranty
Power adapter: NETGEAR 2-year Warranty

Package Contents
ProSafe 16 Port 10/100 Switch with Power over Ethernet (FS116P)
AC Adapter
Wall-mount kit
Installation guide
Warranty/Support Information card