Описание на продукта
Параметри на продукта
Продуктът няма параметри.
Параметри на продукта
Продуктът няма параметри.
Описание на продукта
PoE allows power to be supplied to end devices, such as Wireless Access Points or VoIP Phones, directly through the existing LAN cables. By supplying the power end-span, you can centralize power distribution and backup without the need to increase infrastructure.
Key Features
Conforms to IEEE 802.3 10BASE-T, IEEE802.3u 100BASE-TX and IEEE 802.3x flow control standards
Supports 10/100Mbps auto-detect half/full duplex
Supports TP interface auto MDI/MDI-X function for auto TX/RX swap
Supports 802.3x flow control pause packet for full duplex
LEDs to indicate: Link/Act, Speed, Power Status and PoE activity
Alarm contact function
DIN-Rail, Wall mount and Desktop for easy installation
RoHS Compliance
PoE Features
Supports IEEE 802.3af compliant
8-Port 10/100BaseT(X)
4-Port PoE
Supports Power over Ethernet (PSE) on each PoE-TP port (End-Point)
Full power(15.4w) support for per PoE-TP port
Auto detect powered device and consumption levels
Smart feature for PD on/off, PD detection, power level, PD status and power feeding priority(X)
Automatic Fault Detection(Over/Under Voltage & Current)
Thermal shutdown protection(Tj > 150C)
LED indicators for and PoE activity
Hardware Specification
Power Requirement - DC 48V (Power input by terminal block)
Power Consumption - 65W
Alarm Relay - 1A@24V
Operating Temperature -10C to +60C
Humidity - 44(W) x 220(H) x 130.5(D) mm
Installation - DIN-Rail (Wall Mount: Optional)
EMI - Comply with FCC Part 15 Class A & CE Mark Approval
Shock - IEC60068-2-27
Freefall - IEC60068-2-32
Vibration - IEC60068-2-6
Casing IP30
Key Features
Conforms to IEEE 802.3 10BASE-T, IEEE802.3u 100BASE-TX and IEEE 802.3x flow control standards
Supports 10/100Mbps auto-detect half/full duplex
Supports TP interface auto MDI/MDI-X function for auto TX/RX swap
Supports 802.3x flow control pause packet for full duplex
LEDs to indicate: Link/Act, Speed, Power Status and PoE activity
Alarm contact function
DIN-Rail, Wall mount and Desktop for easy installation
RoHS Compliance
PoE Features
Supports IEEE 802.3af compliant
8-Port 10/100BaseT(X)
4-Port PoE
Supports Power over Ethernet (PSE) on each PoE-TP port (End-Point)
Full power(15.4w) support for per PoE-TP port
Auto detect powered device and consumption levels
Smart feature for PD on/off, PD detection, power level, PD status and power feeding priority(X)
Automatic Fault Detection(Over/Under Voltage & Current)
Thermal shutdown protection(Tj > 150C)
LED indicators for and PoE activity
Hardware Specification
Power Requirement - DC 48V (Power input by terminal block)
Power Consumption - 65W
Alarm Relay - 1A@24V
Operating Temperature -10C to +60C
Humidity - 44(W) x 220(H) x 130.5(D) mm
Installation - DIN-Rail (Wall Mount: Optional)
EMI - Comply with FCC Part 15 Class A & CE Mark Approval
Shock - IEC60068-2-27
Freefall - IEC60068-2-32
Vibration - IEC60068-2-6
Casing IP30
Липсва или е неправилен важен параметър? Предоставената информация е само за ориентиране, затова ви съветваме да проверите дали предлаганият продукт има ключовите параметри от които се нуждаете, преди да купите от магазина по ваш избор. Въпреки че се стремим към максимална точност на информацията, за съжаление не можем винаги да гарантираме 100% съответствие. Цените на продуктите са с включен ДДС.
Продуктът все още няма отзиви.