Zalman ZM-80D-HP

1. Weight : 350 g
2. Heatpipe : Gold plated copper tube
3. Dissipation material : Anodized Aluminum
4. Heat Dissipation Surface Area : 1350 cm2
5. VGA RAM Heatsink material : Anodized Aluminum
6. VGA RAM Heatsink weight:
Frontside : 2.9 g (EA)
Backside : 1.2 g (EA)

Compatible Video Cards

This product can be used with any video cardsthat have heatsink mounting holes.

Note 1)If you are using an nVIDIA GeForceFX5800, an ATI Radeon 9800 Pro, a Matrox Parhelia, or a more advanced model, anOptional Fan (ZM-OP1, sold separately) must be installed. Note 2)This product cannot be installed on nVIDIA GeForce 6800 GT and 6800 Ultra because they do not have 3mmheatsink installation holes. Also, this product cannot be installed on nVIDIA GeForce 6600 GT AGP, 6600 AGP, and PCX 5*** series products. Note 3)Zalman does not recommend VGA card overclocking. Zalman is not responsible for any damage from VGA card overclocking. Note 4)Since this product weighs 350 g, alwaysfirmly fasten the VGA card onto the case with a screw. Special care should be taken while the computer is being moved. Zalman is not responsible for anydamage arising while moving the computer. Note 5)To enhance the performance of this product, the use of a fan on the rear panel of the systems case is recommended. Note 6)After installing this product on a VGA card (Video Graphics Card), the PCI slot adjacent to the AGP slot will be unusable.

Cautions on Using ZM80D-HP

The computer should be placed according to thefollowing diagrams in order for
the product to function properly.

If it is set up in such a way that the video card's GPU faces upwards, thenthis product cannot be used. Also, if you attempt to adjust the positioning ofthe computer by flipping it in a reverse direction, the product will notfunction properly either, so you should place your computer case in its normalposition.

1) Good (AGP slot is under the CPU)
2) Good (AGP slot is under the CPU)
3) Bad (AGP slot is over the CPU)
4) Good (AGP slot is on the right side of the CPU)

To Enhance the Performance
 You can expect a satisfactory coolingperformance with ZM80D-HP alone, but thisproduct is also designed to accommodate anoiseless fan (ZM-OP1) on its heatsink.
Therefore, should you want even more stableperformance, you can attach the noiseless fan(ZM-OP1) as needed.   When installing a video card that has thisproduct installed into a computer system, openup the PCI slot cover under the AGP slot tolower the GPU(VPU) temperature by around 4 to 5degrees Celsius.

Conditions for InstallingZM80D-HP

VideoCards with the Heatsink Mounting Holes

Installable on video cards with theheatsink mounting holes

Interferencewith the Motherboard Components and OtherPeripherals

If the northbridge heatsink that is25mm or taller in height (measured fromthe motherboard's surface) is away fromthe AGP slot in the direction of the CPUby 5.5mm or farther, this product can beinstalled.   If CNPS7000 (Zalman's noiseless CPUcooler) is also to be installed, the CPUretention guide needs to be 35mm orfarther away from the AGP slot for thisproduct to be installable.

Components

1. Frontside Heatsink 1EA
2. Backside Heatsink 1EA
3. Heatpipe Cover 1EA
4. Frontside Heatsink Base 1 Set
5. Backside Heatsink Base 1 Set
6. VGA RAM Heatsinks 1 Set
7. Heatpipe A 1EA
8. Heatpipe B 1EA
9. Screw Driver 1EA
10. Assembly Parts 1 Set
11. Spare Parts 1Set
Optional Components :
ZM-OP1 (ZM80D-HP Optional Fan)
ZM-RHS1 (VGA RAM Heatsinks), Thermal Tape