EDIMAX ES-5240G+

Complies with IEEE802.3/802.3u/802.3ab/802.3z Standards
    Supports IEEE802.3x Flow Control
    Supports IEEE802.1q Q-in-Q Tag VLAN
    Supports IEEE802.1p QoS
    Supports 802.1x Network Access Security
    Supports QoS with 4 Priority Queues
    Supports Port Mirror
    Supports Per-port Shaping, Policing and Broadcast Storm Control
    Supports Multicast/Broadcast/Unknown-Unicast Storm suppression

The Switch is a cost-effective web smart switch that meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet specifications. It is equipped with 12 or 20 ports 10/100/1000Base-TP and 4 dual media ports of optional 10/100/1000Base-T or SFP modules. The switch can be managed through Ethernet port using Web browser, the administrator can log in the switch through network to monitor, configure and control activity of each port. In addition, the switch implements the QoS (Quality of Service), Port Mirror, VLAN, LACP, LAN security, Multicasting video stream protocol, and SNMP v2c. It is suitable for SMB application.

QoS with Four Priority Queues
The QoS(Quality Of Service) feature provides four internal queues to support four different classifications of traffic. High priority packet streams experience less delay inside the switch, which supports lower latency for certain delay-sensitive traffic. The swith classify the packet as one of the four priorities according to 802.1p priority tag, DiffServ and/or IP TOS. The QoS operate at full wire speed. The actual scheduling at each egress port can be based upon a strict priority, weighted round robin or a mix of both.

Multicasting VLAN reduce the multicast video streaming traffic in DVB application
Multicast VLAN is designed for applications (such as Digital Video Broadcasting (DVB)) using multicast traffic across an IP Ethernet network. The feature allows one single multicast VLAN to be shared among different subscriber VLANs on the network. This improves bandwidth utilization by reducing multicast traffic in the subscriber VLANs and simplifies multicast group management.

4 Dual Media Ports for Flexible Fiber Connection
Four dual media ports are provided for flexible fiber connection. You can select to install optional transceiver modules in these slots for short, medium or long distance fiber backbone attachment. Use of the SFP will disable their corresponding built-in 10/100/1000Base-T connections.

802.1x Access Control Improve Network Security
802.1x features enable user authentication for each network access attempt. Port security features allow you to limit the number of MAC addresses per port in order to control the number of stations for each port. Static MAC addresses can be defined for each port to ensure only registered machines are allowed to access. By enabling both of these features, you can establish an access mechanism based on user and machine identities, as well as control the number of access stations.

Performance

Switching Capacity
Supports Gigabit Ethernet Ports with Non-Blocking Wire-Speed
Performance
Supports Trunking Fail Over
Supports 8K MAC address
Supports 340KB (ES-5160G+) / 500KB (ES-5240G+) on-chip frame buffer
Supports 9600byte Jumbo Frame

VLAN
Supports SVL/IVL configuration
Supports Port-base VLAN up to 24 groups, Tag-base VLAN up to 24 groups

QoS
Supports Layer 2/Layer 3 Classification
Supports 802.1p QoS
Supports Priority in a Q-in-Q Tag

Bandwidth Control
Supports port based bandwidth management with ingress and egress rate
from 128 to 3968 kbps.

Port Trunk
Supports Port Trunking with 8 Trunking Group (ES-5160G+) / 12 Trunking
Group (ES-5240G+)
Provides Each Group Up to 8 Gigabit Ports (ES-5160G+) / 12 Gigabit
Ports (ES-5240G+)

Broadcast Storm
Supports Broadcast Storm Suppression

Port Mirroring
Supports One Port Mirror Multi-port
Supports Port Sniff function with 3 modes: (TX Monitor, RX Monitor,
RX-TX pair Monitor)

802.1x Network Access Security
Provides Multi-host Authentication based on Port-based
Provides Mac based Authentication with Radius Server

Features
Complies with IEEE802.3/802.3u/802.3ab/802.3z Standards
Supports IEEE802.3x Flow Control
Supports IEEE802.1q Q-in-Q Tag VLAN
Supports IEEE802.1p QoS
Supports QoS with 4 Priority Queues
Supports Port Mirror
Supports Per-port Shaping, Policing and Broadcast Storm Control
Supports Multicast/Broadcast/Unknown-Unicast Storm suppression
Supports 340KB on-chip frame buffer
Supports 8K MAC address entries
Supports 9600byte Jumbo Frame
Supports 802.1x Network Access Security
Provides Web-base Management
Provides 19 Rack-mount size

Model NO.
ES-5240G+

Standards
IEEE-802.3, IEEE-802.3u, IEEE-802.3ab

Gigabit Port
24

MAC Address
8K

Buffer Memory
400K

Dimension
44(H) x 442(W) x 209(D) mm

Weight
4.2kg

Temperature
0~55 C

Humidity
5~90% (Non-Condensing)

Certification
FCC Class A, CE Mark

Manufacturer link