Kingston FURY Beast RGB 16GB DDR4 3600MHz KF436C18BWA/16

DESCRIPTION:

Kingston FURY KF436C18BWA/16 is a 2G x 64-bit (16GB)

DDR4-3600 CL18 SDRAM (Synchronous DRAM) 1Rx8, memory

module, based on eight 2G x 8-bit FBGA components per module.

Each module kit supports Intel® Extreme Memory Profiles (Intel®

XMP) 2.0. Each module has been tested to run at DDR4-3600 at a

low latency timing of 18-22-22 at 1.35V. The SPDs are programmed

to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V.

Each 288-pin DIMM uses gold contact fingers. The JEDEC standard

electrical and mechanical specifications are as follows:

SPECIFICATIONS:

CL(IDD)
17 cycles

Row Cycle Time (tRCmin)
45.75ns(min. )

Refresh to Active/Refresh

Command Time (tRFCmin)
350ns(min. )

Row Active Time (tRASmin)
32ns(min. )

UL Rating
94 V - 0

Operating Temperature
0oC to +70oC

Storage Temperature
-40oC to +85 oC

  FEATURES:

• Power Supply: VDD = 1.2V Typical


• VDDQ = 1.2V Typical


• VPP = 2.5V Typical


• VDDSPD = 2.2V to 3.6V


• On-Die termination (ODT)


• 16 internal banks; 4 groups of 4 banks each


• Bi-Directional Differential Data Strobe


• 8 bit pre-fetch


• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)


• Height 1.80 (45.8mm), w/heatsink

FACTORY TIMING PARAMETERS:

• Default (JEDEC):DDR4-2400 CL17-17-17 @ 1.2V


• XMP Profile #1:DDR4-3600 CL18-22-22 @ 1.35V


• XMP Profile #2:DDR4-3000 CL16-18-18 @ 1.35V