Kingston HyperX FURY 16Gb (2x8GB) DDR4 3200MHz HX432C18FR2K2/16

DESCRIPTION

HyperX HX432C18FR2K2/16 is a kit of two 1G x 64-bit (8GB)
DDR4-3200 CL18 SDRAM (Synchronous DRAM) 1Rx8, memory
module, based on eight 1G x 8-bit FBGA components per module.
Each module kit supports Intel® Extreme Memory Profiles
(Intel® XMP) 2.0. Total capacity is 16GB.
Each module has
been tested to run at DDR4-3200 at a low latency timing of 18-21-21
at 1.2V.
Additional timing parameters are shown in the
Plug-N-Play (PnP) Timing Parameters section below. The
JEDEC standard electrical and mechanical specifications are
as follows:

SPECIFICATIONS:

CL(IDD): 18 cycles
Row Cycle Time (tRCmin): 45.75ns(min. )
Refresh to Active/Refresh Command Time (tRFCmin): 350ns(min. )
Row Active Time (tRASmin): 24.375ns(min. )
Maximum Operating Power: TBD W*
UL Rating: 94 V - 0
Operating Temperature: 0o C to +85o C
Storage Temperature: -55o C to +100o C

JEDEC/XMP TIMING PARAMETERS:

JEDEC/PnP: DDR4-3200 CL18-21-21 @1.2V
XMP Profile #1: DDR4-3200 CL18-21-21 @1.2V
XMP Profile #2: DDR4-2933 CL17-19-19 @1.2V

FEATURES

Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.2V to 3.6V
On-Die termination (ODT)
16 internal banks; 4 groups of 4 banks each
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
Height 1.340 (34.04mm), w/heatsink