NETGEAR FS728TSEU

Grow your network as you grow your business, adding switches to the stack as you need them. Mix
and match 24 or 48 port switches for up to 192 ports controlled at a single point. Two SFP GBIC fiber
slots provide optional fiber connectivity for greater distance. Use either copper or fiber connections to
connect up your stack
In addition to stacking capability and popular key management features, these third generation Smart
Switches offer more control such as 802.1x for security, layer 3 traffic prioritization, SNMP v2c and v3,
and rate limiting.
Ideal for growing businesses who want the benefits of management without the cost and complexity
of a managed network. Stack them right out of the box without management configuration!
LEDs located on the front panel make switch status easy to observe and troubleshooting easy to
accomplish. Made to last, these durable switches are housed in a 17-inch metal box and comes with
a rack mounting kit.
**Use with AGM731F ProSafe 1000BASE-SX SFP GBIC, AGM732F ProSafe 1000BASE-LX SFP GBIC, or AGM733 ProSafe 1000BASE-LZ
SFP GBIC module

Technical Specifications
Network Protocol and Standards
Compatibility:
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-X
- IEEE 802.3x full-duplex flow control
Interfaces
- FS728TS: 24 10/100 Mbps auto sensing Fast
Ethernet switching ports
- FS752TS: 48 10/100 Mbps auto sensing Fast
Ethernet switching ports
- 4 Built-in RJ-45 Gigabit Ethernet ports for
10/100/1000 Mbps connectivity
- 2 SFP slots for fiber Gigabit Ethernet modules
Port Functions
- Auto-sensing and auto-negotiating capabilities
for all ports
- Auto Uplink on all ports to make the
right connection
Administrative Switch Management
- IEEE 802.1Q Static VLAN (Up to 128)
- IEEE 802.1p Class of Service (CoS)
- Port-based QoS
- IEEE802.3ad (manual) Link Aggregation
- IEEE 802.1D Spanning Tree Protocol
- SNMP v1, v2c, v3
- RFC 1213 MIB II
- RFC 1643 Ethernet Interface MIB
- RFC 1493 Bridge MIB
- RFC 2131 DHCP client
- IEEE 802.1x
- Port-based security by locked MAC addresses
- Storm control for broadcast, multicast and
unknown unicast packets
- Port-based ingress/egress rate limiting
- SNTP
- RMON group 1, 2, 3, 9
- Private Enterprise MIB
- Port Mirroring Support
- Web-based configuration
- Configuration Backup/Restore
- Password Access Control
- Firmware upgradeable
Active Flow Control
- Half-duplex back-pressure control
- Full-duplex IEEE 802.3x pause frame flow control
Performance Specifications
- Forwarding modes: Store-and-forward
- Bandwidth: 12.8 Gbps for FS728TS, 17.6 Gbps
for FS752TS
- Network latency: Less than 20 microseconds for
64-byte frames in store-and-forward mode for100
Mbps to 100 Mbps transmission
- Buffer memory: 128 KB
- Address database size: 8,000 media access control
(MAC) addresses per system
- Addressing: 48-bit MAC address
- Mean Time Between Failure (MTBF): 100,000
hours (~11 years) for FS728TS, 84,000 hours
(~9 years) for FS752TS
NETGEAR ProSafe Related
Products
- GA311 32-bit Gigabit
PCI Adapter
- GA511 Gigabit PC Card Adapter
- FS726TP 24 Port 10/100 Smart
Switch w/2 Gigabit Ports and PoE
- FS726T 24 port 10/100 Smart
Switch with 2 Gigabit ports
- FS750T2 48 port 10/100 Smart
Switch with 2 Gigabit ports
- GS716T 16 port Gigabit
Smart Switch
- GS724T 24 port Gigabit
Smart Switch
- GS748T 48 port Gigabit
Smart Switch
- NMS100 ProSafe Network
Management System
- PMB0331 ProSupport OnCall
24x7 Support Service
- ProSupport Maintenance
Services:
- PMB0331 OnCall 24x7
- PRR0331 XPressHW
- PRR0331 ProSupport
XPressHW Support Service
FS728TS/ ProSafe 24 and 48 Port 10/100 Stackable Smart
FS752TS Switches with 4 Gigabit Ports
LEDs
- Unit: Power, Master, Stack ID
- Per Port: Link, Speed, Activity
- Per Gigabit Port: Link, Speed, Activity, Stack
Power Supply
- Power Consumption: 15 W maximum
- 100-240VAC/50-60 Hz universal input
Physical Specifications
- Dimensions (H x W x D): 1.7 x 17.8 x 8.1 in.
(43 x 440 x 205 mm)
- Weight: FS728TS: 5.73 / 2.6 (lbs/kg)
FS752TS: 6.57 / 2.98 (lbs/kg)
Environmental Specifications
- Operating temperature: 32 to 122° F (0 to 50° C)
- Storage temperature: -4 to 158° F (-20 to 70° C)
- Operating humidity: 90% maximum relative humidity,
non-condensing
- Storage humidity: 95% maximum relative humidity,
non-condensing
- Operating altitude: 10,000 ft (3,000 m) maximum
- Storage altitude: 10,000 ft (3,000 m) maximum
Electromagnetic Compliance
- CE mark, commercial
- FCC Part 15 Class A
- VCCI Class A
- EN 55022 (CISPR 22),
- EN 55024 (CISPR 24)
- C-Tick
Safety
- CE mark, commercial
- CUL 60950 (Listed)/ EN60950
(Low Voltage Directive)
Warranty
- NETGEAR 5-year warranty
System Requirements
- Category 5 network cables
- Network card for each PC
- Network software (e. g. , Windows®)
Package Contents
- FS728TS/FS752TS ProSafe 24/48 port Stackable
Smart Switch with 4 Gigabit Ports
- Rubber footpads
- Power cord
- Rack-mount kit
- Resource CD Installation Guide
- Warranty/Support information card
Modules
- AGM731F ProSafe 1000BASE-SX SFP GBIC:
Module with LC connectors for 50um or 62.5um
multi-mode fiber cable
- AGM732F ProSafe 1000BASE-LX SFP GBIC:
Module with LC connectors for 9um single-mode
fiber cable
- AGM733 ProSafe 1000BASE-LZ SFP GBIC:
Module with LC connectors for 9um single-mode
fiber cable