ARCTIC P14 PWM PST A-RGB white (ACFAN00276A)

Addressable RGB for Full Colour Control

The P14 PWM PST A-RGB has 12 digital A-RGB LEDs in the center fan wheel. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.

 

0dB Mode - Zero RPM

The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.

 

Maximum Smoothness, Minimum Vibration

The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P14 PWM PST A-RGB has rubberised contact surfaces and thus reduces audible vibrations to a minimum.

 

Optimised for High Static Pressure

The P14 PWM PST A-RGB operates with a focused airflow and a high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.

 

200 to 1900 RPM Controlled via PWM PST

With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P14 PWM PST A-RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance.

 

Specifications:

Fan Speed:

200—1900 rpm PWM controlled (0 rpm below 5% PWM)

Airflow:

68.9 cfm | 117.06 m³/h

Static Pressure:

2 mmH 2 O

Noise Level:

0.3 Sone

Fan

Fan Frame:

Standard

Control Type:

PWM PST

Connector:

4-Pin-Connector + 4-Pin-Socket

Fan Bearing:

Fluid Dynamic Bearing

Operating Ambient Temperature:

0—40 °C

Electric Characteristics:

Typical Voltage:

12 V DC

Starting Voltage:

5 V

Current | Voltage:

0.17 A | 12 V DC

Cable Length:

400 mm

RGB Specifications

LEDs:

12 A-RGB LEDs

Connector:

3-Pin 5 V-DI-GND Connector

Current / Voltage:

0.4 A/5 V

Cable:

450 mm Cable with 80 mm Sharing Cable, Black

Size & Weight

Length:

140 mm

Width:

140 mm

Height:

27 mm

Weight:

225 g