GOODRAM PX500 1TB M.2 PCIe NVMe (SSDPR-PX500-01T-80)
183,20 лв.
В наличностВид:
Най-евтини оферти (1)
Описание на продукта
Параметри на продукта
Производител
GOODRAM
Оформление
M.2
Капацитет
1000 GB
NAND flash тип
TLC
Максимална SSD скорост на четене
2050 MB/s
Максимална SSD скорост на запис
1650 MB/s
Охладителни ребра
не
LED осветление
не
PCI-e генерация
3.0
Параметри на продукта
Производител
GOODRAM
Оформление
M.2
Капацитет
1000 GB
NAND flash тип
TLC
Максимална SSD скорост на четене
2050 MB/s
Максимална SSD скорост на запис
1650 MB/s
Охладителни ребра
не
LED осветление
не
PCI-e генерация
3.0
Описание на продукта
Goodram PX500 NVME PCIE GEN 3 X4 SSD 1TB
SSDPR-PX500-01T-80
By providing up to 4x better sequential and random transfer performance compared to SATA III Solid State Drives and lower latency than AHCI drives, GOODRAM PX500 pumps-up your PC. The performance will improve the work of more demanding customers, offering a reading of up to 2050MB/s. It is also perfect as a stand-alone drive, as well as an add-on to a hard disk in desktops and laptops. Available capacities for the PX500 make the drive work in both roles.
High performance
By creating a disk based on efficient memory in 3D TLC technology and the SMI 2263XT controller, we managed to achieve sequential transfer parameters of up to 2050 MB/s for reading and 1650 MB/s for write and 173 000 read operations and 143 000 write operations per second (IOPS).
New possibilities with NVMe
NVM Express communication protocol was designed from the ground up to achieve the potential of fast flash based storage media. By utilizing it in PX500 SSD, we were able to extract the maximum performance from its memory, controller and PCIe Gen 3 x4 interface. NVMe drastically reduces latency and queuing to bring much better responsiveness vs. AHCI-based SSD.
Heat under control
One of the problems that concerns M. 2 SSD format is the thermal throttling – limitation of efficiency due to too high ambient temperature. To get it under control, PX500 have special coating consisting of copper and graphite. Thanks to this, we have obtained very good heat dissipation, without increasing the size of the disk.
Capacity
1TB
Interface
M. 2 PCIe NVMe gen 3 x4 (M key)
Form factor
M. 2 size 2280
Memory chips
3D NAND flash
Controller
SMI 2263XT
IOPS
up to 173 000 for read operations
up to 143 000 for write operations
MTBF
1 500 000 hours
Operating temperature
0 - 70°C
Storage temperature
-45 - 85°C
Dimensions
80 x 22 x 3,5 mm
Performance
Sequential read performance (max. ) 2 050 MB/s
Sequential write performance 1 650 MB/s
Random read performance (4K QD32) (max. ) 171 000 IOPS
Random write performance (4K QD32) (max. ) 143 000 IOPS
SSDPR-PX500-01T-80
By providing up to 4x better sequential and random transfer performance compared to SATA III Solid State Drives and lower latency than AHCI drives, GOODRAM PX500 pumps-up your PC. The performance will improve the work of more demanding customers, offering a reading of up to 2050MB/s. It is also perfect as a stand-alone drive, as well as an add-on to a hard disk in desktops and laptops. Available capacities for the PX500 make the drive work in both roles.
High performance
By creating a disk based on efficient memory in 3D TLC technology and the SMI 2263XT controller, we managed to achieve sequential transfer parameters of up to 2050 MB/s for reading and 1650 MB/s for write and 173 000 read operations and 143 000 write operations per second (IOPS).
New possibilities with NVMe
NVM Express communication protocol was designed from the ground up to achieve the potential of fast flash based storage media. By utilizing it in PX500 SSD, we were able to extract the maximum performance from its memory, controller and PCIe Gen 3 x4 interface. NVMe drastically reduces latency and queuing to bring much better responsiveness vs. AHCI-based SSD.
Heat under control
One of the problems that concerns M. 2 SSD format is the thermal throttling – limitation of efficiency due to too high ambient temperature. To get it under control, PX500 have special coating consisting of copper and graphite. Thanks to this, we have obtained very good heat dissipation, without increasing the size of the disk.
Capacity
1TB
Interface
M. 2 PCIe NVMe gen 3 x4 (M key)
Form factor
M. 2 size 2280
Memory chips
3D NAND flash
Controller
SMI 2263XT
IOPS
up to 173 000 for read operations
up to 143 000 for write operations
MTBF
1 500 000 hours
Operating temperature
0 - 70°C
Storage temperature
-45 - 85°C
Dimensions
80 x 22 x 3,5 mm
Performance
Sequential read performance (max. ) 2 050 MB/s
Sequential write performance 1 650 MB/s
Random read performance (4K QD32) (max. ) 171 000 IOPS
Random write performance (4K QD32) (max. ) 143 000 IOPS
Липсва или е неправилен важен параметър? Предоставената информация е само за ориентиране, затова ви съветваме да проверите дали предлаганият продукт има ключовите параметри от които се нуждаете, преди да купите от магазина по ваш избор. Въпреки че се стремим към максимална точност на информацията, за съжаление не можем винаги да гарантираме 100% съответствие. Цените на продуктите са с включен ДДС.
Продуктът все още няма отзиви.