Cisco RV215W-E-K9-G5

Cisco RV215W

Routing:
Static routing
Dynamic routing
Routing Information Protocol (RIP) v1 and v2
Inter-VLAN routing

Layer 2:
802.1Q-based VLANs
4 active VLANs (3 to 4094 range)

Network
Dynamic Host Configuration Protocol (DHCP) server
Point-to-Point Protocol over Ethernet (PPPoE)
Point-to-Point Tunneling Protocol (PPTP)
Layer 2 Tunneling Protocol (L2TP)
DNS proxy
DHCP relay agent
IGMP Proxy and multicast forwarding
Rapid Spanning Tree Protocol (RSTP)
Dynamic DNS (DynDNS, TZO, no-ip. com, 3322. org)
Network Address Translation (NAT), Port Address Translation (PAT)
Port management
Port mirroring
Software-configurable network edge (DMZ) to any LAN IP address

IPv6:
Dual-stack IPv4 and IPv6
6-to-4 tunneling
Multicast Listener Discovery (MLD) for IPv6 (RFC 2710)
Stateless address auto-configuration
DHCP v6 Server for IPv6 clients on LAN
DHCP v6 client for WAN connectivity
Internet Control Message Protocol (ICMP) v6
Static IPv6 Routing
Dynamic IPv6 Routing with RIP for IPv6 (RIPng)
IPv6 Rapid Deployment

WLAN hardware:
IEEE 802.11n standard-based access point with 802.11b/g compatibility

Radio and modulation type:
802.11b: direct sequence spread spectrum (DSSS)
802.11g/n: orthogonal frequency division multiplexing (OFDM)
2 omnidirectional 1.8 dBi gain fixed external antennas

Operating channels:
11 in North America
13 in most of Europe
Automatic channel selection

Transmit power:
802.11b: 17 dBm +/- 1.5 dBm
802.11g: 15 dBm +/- 1.5 dBm
802.11n: 12.5 dBm +/- 1.5 dBm

Receiver sensitivity:
-87 dBm at 11 Mbps
-71 dBm at 54 Mbps
-68 dBm at msc15, HT20 / -66dBm at mcs15, HT40°

WAN:
One 10/100 Mbps Fast Ethernet WAN port

LAN:
Four 10/100 Mbps Fast Ethernet LAN ports

WLAN:
Built-in 802.11n wireless access point

LEDs:
Power, WPS, WAN, Wireless, LAN (ports 1-4)

Power:
12V 1.67A