Supernova Велосипедна светлина Supernova B54 Pro Akku-Scheinwerfer Set Bike light - Black - размер One Size (870-3185-0111)

Suitable for: Unisex. Recommended use: mountain bike. Other material information: housing made of anodised aluminium, matt black. Attachment: clamping ring small; clamping ring large; knurled screw for universal HBM (with small retaining O-ring); hook-and-loop tape; self-adhesive foam pad for high beam scanner. Power source: rechargeable battery operated. Disposal Notice: Note on the disposal of used batteries. Luminosity: maximum 1600 lumen (275 lux). Burn time (min. Lumen): 50 h. Burn time (max. Lumen): 2 h. Dimensions (outer): housing: 38 x 78 x 50 mm; battery: 97.6 x 46 x 50 mm. Weight: 430 g. Weight reference: with rechargeable battery. Misc: optics: M99 Matrix reflector; rechargeable battery: 300 g; headlight: 130 g. Note: approved for German road traffic. Item No. : 870-3185. Bike light set with rechargeable battery and high beam button The B54 Pro battery-powered bike light set consists of the B54 Pro bike light, the B54 battery pack, a magnetic high beam button with a micro gold plug, a universal button holder, two clamping rings (small and large), a hook-and-loop strap, a self-adhesive pad for the high beam button, a charger and a knurled screw for universal HBM with a small retaining O-ring. B54 Pro bike light with low beam and high beam The Supernova B54 Pro bike light is a bright StVZO-approved battery-powered light with low beam and high beam functionality. Its battery is charged in just 2.5 hours and provides up to 50 hours of maximum burn time. The light can be easily controlled via the Supernova app for Apple iOS and Android, allowing the charge status to be displayed at any time, to the minute, as the app communicates with the battery. A precise Battery Management Controller integrated into the battery enables a remaining light display for all brightness levels in the Supernova app that is accurate to the minute, regardless of the temperature. Moreover, this status is displayed on the battery itself with an RGB LED. In addition, the bike light provides illumination for unclear terrain, so that you can see hanging branches, signs, junctions and poorly visible pedestrians more quickly - no matter how steep and winding the trail may be! The high beam has an extremely wide aperture angle to ensure excellent perception of your surroundings. Plus, the high beam is optimised to provide a particularly large amount of light above the cut-off line, so that fork movement is compensated for and your visibility of the road is maintained. On your approach into the city, you can ride glare-free in dipped beam mode. The high beam can be switched on at the touch of a button as soon as it is needed. M99 Matrix Mirror This is a lighting technology that sets new standards in bike lighting: an LED matrix, intelligently controlled and combined with a highly complex facetted reflector consisting of 99 individually calculated surfaces and designed for brilliance, ensures the best possible brightness. Here, automotive technology has been packed into a bike light in miniature format. Aluminium housing The housing is not only super stable, but also boasts the best heat dissipation properties. And the better the cooling, the brighter the LED lights up. Cooling fins on the housings increase the surface area, allowing heat to be dissipated more effectively. The housing also features a salt-water-resistant anodised finish and can withstand the most adverse conditions. Battery heating and long-life mode The optimum charging temperature for a battery is around 20°C. That's why this high-tech battery, like a modern electric car, features an integrated battery heater to ensure the optimum charging temperature when it is too cold. If the temperature exceeds 40°C, charging is automatically prevented until the temperature has dropped again. In addition, the Longlife mode ensures a particularly long service life for the battery cells. In this mode, a special processor-controlled charging process prevents the cells from overheating during charging. The battery is only charged to 85% in this mode, which extends its service life. Light sensor and reserve light The light sensor in the battery enables intelligent activation of the dipped headlights when darkness falls or if there is a sudden change in light, for example when cycling through a tunnel. No more being plunged into darkness: two hours of ECO low beam are always automatically available to you after the normal burn time has elapsed. Hibernation mode If you do not use the battery for a longer period of time, you can simply put it into hibernation mode. It is then kept at the optimum voltage on the charger. This almost completely stops the chemical ageing of the battery. Plus, deep discharge is prevented. Product includes: Bike light B54 Battery Pack Magnetic high beam sensor with micro gold plug USH22-32: Universal push-button holder Clamping ring small (ø 22 - 32 mm) Clamping ring large (ø 33 mm) Knurled screw for universal HBM (31.8 mm), with small retaining O-ring Hook-and-loop strap Self-adhesive foam pad for high beam sensor Charger with 6 hours charge time The highlights at a glance: Battery with button for deep sleep mode - get the maximum capacity out of your battery Compatible with all Garmin Edge devices High beam: 1,600 lm, 275 lx (Max mode) / 1,150 lm, 260 lx (Standard mode) / 425 lm, 70 lx (Eco mode) Dipped beam: 450 lm, 150 lx (standard mode) / 75 lm, 30 lx (eco mode) Burn time: 2 hours = high beam (max mode) / 3.5 hours = high beam (standard mode) / 13 hours = high beam (eco mode) / 10 hours = low beam (standard mode) / 50 hours = low beam (eco mode)