TOA P-1812

Power Amplifier 120W 100V The P-1812 PA Amplifier delivers 120 W power output. It is so designed that its power ON/OFF can be remotely controlled when used in conjunction with A-1800 series PA Amplifiers (optional). The P-1812 can also be used as a stand-alone amplifier. Features: Power output of 120 W. Emergency control: On the back panel of amplifier is a remote-in terminal for emergency control which sets the default output level for the emergency input Input: LINE: 0dB*1/–10dB*1 (switchable) 10kOhm, transformer balanced & RCA pin jack Line Output: 0dB*1, 600Ohm, unbalanced, RCA pin jack; Speaker Outputs: High impedance (100V line/83Ohm), M4 screw terminal Low impedance (4 – 16Ohm), M4 screw terminal (Both Low and High impedance terminals cannot be used at the same time. ) Specifications: Rated Output: 120W 100V Power Supply: 220 – 230 V AC or 240 V AC, 50/60 Hz; 24 V DC Power/Current Consumption: AC operation: 258W (rated output), 94W (EN60065) 24V DC operation: 7.0A (rated output), 2.7A (EN60065) Frequency Response: 50 – 20,000 Hz (±3 dB) S/N Ratio, (Band Pass: 20 – 20,000Hz): Over 100dB (Master volume: min) Over 97dB (Master volume: max, INPUT LEVEL switch: 0dB) Over 90dB (Master volume: max, INPUT LEVEL switch: –10dB) Control Input: POWER REMOTE: No-voltage make contact input, open voltage: 24V DC, short-circuit: under 1mA, M3 screw terminal EMERGENCY: No-voltage make contact input, open voltage: 24V DC, short-circuit: under 1mA, M3 screw terminal Dimensions (WxHxD): 420 x 107.7 x 367 mm Weight: 12.2 kg