Q Acoustics 3010i

Q Acoustics 3010i

 

Our revolutionary 3010i speakers are compact, but deliver nothing short of exceptional sound quality. They can fill a room with open, immersive sound with their 4-inch precision drivers and feature Point-to-Point (P2P) bracing, which supports the parts of the enclosures that need to be stiffened.

 

 

Open Soundstage From Slim-Line Speaker

The focus of any great loudspeaker is to produce an open, ‘being there’ sound and the Q 3010i speakers deliver just that despite their compact size. Boasting room-filling sound with its 100mm (4 in) and 22mm (0.9 in) precision drivers, focussing on power-to-size ratio, the crossover has been revised to take advantage of a larger cabinet volume to enhance sensitivity and bass extension. The Q 3010i speakers can be shelf-mounted on compliant, pre-fitted rubber feet or stand-mounted or wall-mounted on optional, dedicated stands and brackets.

 

 

Increased Cabinet Size Delivering A Bolder Sound

The Q 3010i maintain the same acoustically optimal front profile, but have been made slightly taller and 25% deeper than previous models. This increased internal volume has enabled Q Acoustics to gain an extended low frequency response from the ported design so that more-than-ever the smaller enclosures in the range belie their diminutive stature with an impressively large-scale sound. As an added benefit the enlarged front-to-back dimension means that any cone- generated noise reflected from the back wall of the enclosure and out through the cone itself is reduced.

 

 

High-Frequency Driver Unit

3000i Series tweeters are decoupled from the baffle via a compliant suspension system. Vibrations from the woofer, which can impair the performance of the tweeter are isolated allowing the tweeter to perform with dramatically reduced interference.

 

 

Mid/Bass Driver

Whichever 3000i model you choose the cone is precision formed from impregnated and coated paper and teamed with a newly developed, low-hysteresis, rubber surround. The coated paper cone provides the optimum balance between stiffness and self- damping which means it can accelerate without flexing and stop very accurately without unwanted resonances.

 

 

 

Specifications

Crossover Frequency2.6kHzDimensions250 x 150 x 235 mm cabinet 
253 x 150 x 251 mm overallEnclosure Type2-Way ReflexFrequency Response(+3 dB, -6 dB) 65 Hz - 30 kHzImpedance6 OhmMinimum Impedance4 OhmPower Input15 - 75WAV Receiver (2 ch. driven)50 - 125 WSensitivity(2.83 V@1 m) 86dBTweeter22 mmWeight4.1kg