Zyxel ES-315-F

Easy 5-port L2 Managed Switch Deployments
ZyXEL ES-315-F is a L2 premise-managed Ethernet switch with up to 4 10/100Mbps auto-crossover MDI/MDI-X ports and 1 FX port. With superb performance in network resiliency, QoS, IP multicasting and security, ES-315-F is an ideal triple-play service solution for active Ethernet ETTx deployments aiming at service providers as well as cable, utility and municipality operators.

Secured Service-level IP TV & VoIP Operations
To IP TV and VoIP services, the quality is the key to success. As such ES-315-F comes with proven QoS and VLAN functionalities like multi-layer (L2/L3/L4) ACL and 4 priority queues with SP/WRR to ensure smooth operations. For the hottest IP TV services, the ES-315-F also supports MVR to work with the IGMP snooping feature that empowers commercial-class IP TV deliveries.
System Specification

    IEEE 802.3 10BASE-T Ethernet
    IEEE 802.3u 100 BASE-TX/FX Ethernet
    IEEE 802. ab 1000 BASE-T Ethernet
    IEEE 802.3z
    IEEE 802.3x Flow control
    IEEE 802.1d Spanning tree protocol
    IEEE 802.1Q VLAN tagging

Performance

    1Gbps, non-blocking
    Maximum frame size: 1522 bytes including tag/CRC
    MAC and Packet Buffer
    1K layer2 MAC addresses table
    Support 512K bits SRAM for packet buffer
    Traffic Management and QoS
    802.1p, 4 egress priority queues
    SPQ, queuing algorithm
    IGMP Snooping v1/v2
    Fast Leave
    Rate limiting
    IGMP snooping per VLAN (IGMPv1/v2 up to 4 VLAN - user configurable), up to 256 groups
    IGMP filtering
    MVR
    Configurable IGMP snooping timer and priority.

User Security and Authentication

    Static MAC address filtering
    Static MAC address forwarding

Network Management

    Configuration by telnet/web
    Firmware upgrade by FTP/web
    Configuration backup and restore by FTP/web
    System management access control
    System clock by manual setup or NTP
    telnet
    SNMP v2c
    ICMP echo/echo reply
    SSH/SSL
    Cisco-like CLI
    MIB Information
    RFC1213
    RFC1493 Bridge MIB
    RFC1155 SMI
    RFC2647 Bridge MIB extension (for 802.1Q)
    ZyXEL Ethernet private MIB for EMS

Hardware Specification

    4 ports 100Base-TX + 1 port FX
    Auto-negotiation
    Auto-MDI/MDI-X
    Compliant with 802.3/802.3u
    Back-pressure flow control in half duplex mode
    802.3x flow control in full duplex mode
    RJ-45 connector

Physical Specification

    Dimension: 194 (W) x 129.7 (D) x 25.9 (H) mm
    Weight: 325 g

Environmental Specification

    Operating Requirements
        Temperature: 0?C ~ 40?C
        Humidity: 10% ~ 90 % ( non-condensing )
    Storage Requirements
        Temperature: -30?C ~ 60?C
        Humidity: 10% ~ 85 % ( non-condensing )

Certification

    Safety
        UL 60950-1
        CSA 60950-1
        EN 60950-1
        IEC 60950-1
    EMC
        FCC Part15 (Class B)
        CE EMC